1 / 1
Ender 3 NG v1.2 Enclosure Hinges with POM wheel bearings
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model changes the hole size to accomodate the bearings from spare pom wheels.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 475
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (29)Powiązane
I forgot to order the correct bearings and instead of waiting 3 weeks for them to arrive from Ali i decided to use some of the spare POM wheels i had and remove the bearings.
The bearings can be removed by inserting a small screwdriver and pushing on the opposite bearing through the hole. (you cant push both bearings since there is a lip holding them in place)
