Durable Wall Mount for Stihl BGA 56 Blower – Convenient Storage Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for the Stihl model BGA 56
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 820
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a compact support designed for a blower. It’s quick to print and requires no supports, making it a hassle-free project. I’ve included the STEP file so you can easily modify the design if you need to adjust the screw size or make other changes.
For durability, I printed mine in PETG, as it will be used in my garage where summer temperatures can get too high for PLA. My print settings were 5 walls, 25% infill, and a 0.24mm layer height.
I recommend printing the small support knob at 100% infill, since it bears the entire weight of the blower—be sure to use sufficient infill to ensure this part is strong enough.
You’ll need two screws for assembly. The current design features 5mm holes to accommodate standard hardware.
Tips:
Double-check your screw sizes and adjust the STEP file if needed.
Review your infill settings for the support knob to ensure maximum strength.