1 / 7
Dragon effector for FLSUN V400
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dragon + WWBMG + cutter effector for FLSUN V400
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 658
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
This is a mod for the FLSUN V400 effector to accept a dragon hotend, a customized WWBMG extruder, and a remote-actuated filament cutter.
Sources:
- https://www.printables.com/model/580837-effector-plate-flsun-v400
- https://github.com/Armchair-Heavy-Industries/A4T/tree/main/CAD/WW-BMG%20for%20A4T
- https://github.com/weuzor/bowden_cutter
BOM:
In addition to the BOM's for each of the sources listed above, you'll need:
- Flanged M2 heatset inserts https://www.mcmaster.com/97171A300/
- V400 effector plate + LED PCB https://www.aliexpress.us/item/3256805244402359.html?gatewayAdapt=glo2usa4itemAdapt
- Dragon hotend https://www.phaetus.com/products/dragon-hotend-hf
Installation and assembly notes:
- This mod will permanently modify your V400 effector plate. You must cut away the material indicated in the pictures.
- Inserts go where highlighted in the pictures. M3 inserts everywhere except for those in the filament path and shuttle, which are flanged M2's.
- Drill out the inserts in the filament path with a 2mm drill bit, and chamfer them a little bit on the side without the flange.
- VERY IMPORTANT: place a 6mm long piece of PTFE tubing above the hotend.