Rear Shell for Game Boy Color
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print a rear shell to go with my printable front shell, and let the modding begin!!
- Ocena
- 0 / 5
- Polubienia
- 45
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 3179
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 3D-printable shell for the Game Boy Color, designed from the ground up to be printable without crazy supports or impossible tolerances. Designed for modding, and general tinkering!
Download the front shell here:
Instructions are still in progress BUT… assembly is quite straight forward and the battery cover is held on with the extra Phillipshead screw that is not used during mod builds (although, you can fit a Triwing if you have extra).
PRINTING:
Support is required!
The GBC Lower needs support near the battery hole
LiPo Battery Cover tabs require support
This design also includes many small bridges. Any modern 3D printer should have no issues with them!
UPDATE:
GBC Rear Lower v1.1 - 24 March 2025
Shell thickness increased from 0.755mm to 1.083mm around the battery bay
FEEDBACK:
If there are specific issues with the model, please DM me on Printables or Instagram so I can update the model for everyone!