1 / 5
Kobra Neo Part Cooling Fan Duct 5015Blower (Titan Aero) — zdjęcie 1
1 / 5

Kobra Neo Part Cooling Fan Duct 5015Blower (Titan Aero)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Part cooling 5015 blowerfan duct designed for kobra neo (titan aero) with smal height adj. and hole for endoscope cam

Ocena
0 / 5
Polubienia
1
Pobrania
24
Wydruki
0
Wyświetlenia
269
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Kobra Neo Part Cooling Fan Duct (Titan Aero)

Hey everyone! I'm sharing this project that I started a while ago but abandoned after upgrading to a Volcano hotend and a dual 5015 fan assembly. Since I no longer need it, I figured someone else might find it useful!

This is a part cooling fan duct designed for the Anycubic Kobra Neo with a Titan Aero extruder. It includes a small height adjustment feature for better fitment. Additionally, there’s a dedicated slot to accommodate a 7mm endoscope camera (such as the one from Allie) for better print monitoring.

Most of the design prints without supports, as the angles generally stay under 40 degrees. However, a few tree supports may be needed in crucial areas for the best results.

Let me know if you have any questions

Tagi