Qidi Plus 4 Fiberon Profiles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Base filament profiles for Orca Slicer to get everyone started in the right direction.
- Ocena
- 5 / 5
- Polubienia
- 118
- Pobrania
- 910
- Wydruki
- 2
- Wyświetlenia
- 2911
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Overview
A good starting point for the Fiberon line of filaments for the Qidi Plus 4. These filament profiles are for a .4 nozzle and are for Orca Slicer.
Download
Download the file normally, this should open up the file in a new tab in your web browser. Click save in the upper left hand corner(Firefox) or for Chrome click the menu in the upper right, go down to cast, save and share. Then save.
Installation
Open Orca Slicer and import the file you saved.
File>Import>Import Configs>Select downloaded file.
Tuning
These profiles are always a work in progress and I advise everyone to fine tune their filaments for best results. At very least do the pressure advance test and enable it. If you need help fine tuning your filament I suggest going to the Orca Slicer Wiki for instructions.
Other Models you May Like:
Like my work?
❤ a few of my models
or
Edits:
9/5/2025 | Fiberon ASA-CF08 added
Contributions:
Mr. Paul | Retraction Settings