OpenSwords - Ring Dagger

Open Swords is a project that aims to make historical fencing available to anyone!

Comes in both curved and straight quillon versions.

The only tools you need to build one of these is a 3D Printer, a heat gun, and a screwdriver!

With the settings below, and a 3/4in dowel from the hardware store, you can expect to get a dagger that comes in just over 130g

These files are donate as you please, but are free to the public! If these files have helped you in any way, I'd really appreciate a donation.

https://ko-fi.com/openswords

Hardware:

All screw holes are designed with a #4x1/2" wood screw in mind, but #6x1/2" should also work. It simply won't be as neatly flush.

For the Guard:

I recommend a brim and 15% infill for all nozzle diameters

For the Handle:

I recommend a brim and 15% infill for all nozzle diameters. 

Printing with fuzzy skin will add enough roughness to easily grip the handle! The recommended settings are as follows:

• Fuzzy skin: Outside walls
• Fuzzy skin thickness: 0.15mm
• Fuzzy skin point distance: 0.3mm