DF64 (gen 2) coffee grinder 10 degree shoe base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds a slight angle to the grinder to help with discharge.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 489
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to print on the Mk3 without parting; it fits diagonally. Model has holes underneath for feet, of which there are two versions included. I didn't notice the need for feet until I tried to adjust the grinder on a hard counter. You can sit it on a rubber mat, or use the different feet (printed in TPU) to get a good grip on the counter.
It doesn't fix the initial retention when first setting the grinder down to espresso levels, but feeding it slowly now seems more consistent. I wanted an easy way to try it out. On my first espresso grind after filter adjustment, I add 0.7 grams for retention and let it go.
I ended up with a wide foot on the front, four round feet on the sides and no foot at the rear.