DF64 (gen 2) coffee grinder 10 degree shoe base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adds a slight angle to the grinder to help with discharge.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 67
- Makes
- 0
- Views
- 491
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to print on the Mk3 without parting; it fits diagonally. Model has holes underneath for feet, of which there are two versions included. I didn't notice the need for feet until I tried to adjust the grinder on a hard counter. You can sit it on a rubber mat, or use the different feet (printed in TPU) to get a good grip on the counter.
It doesn't fix the initial retention when first setting the grinder down to espresso levels, but feeding it slowly now seems more consistent. I wanted an easy way to try it out. On my first espresso grind after filter adjustment, I add 0.7 grams for retention and let it go.
I ended up with a wide foot on the front, four round feet on the sides and no foot at the rear.