Multi Part Potted Rose (parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created a nice little parametric pot for the "Multi Part Rose" model.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 327
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
This model requires the flower and (any) stem from the base model.
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily.
The model consists of two models: the pot and the dirt. Both have an original size and a bigger size, make sure that you keep both parts consistent in that regard. They can be printed individually and fit together. The pot is hollow, so it can be used as a small storage as well.
Printing Information:
Print the pot upright but the dirt upside down
no supports or brim are needed
Note that I had to comply with the license of the base model and that the license of this model is therefore also non-commercial. Would I have had the choice, only attribution would be required. This also means that, would you have commercial permission from the base author, you can use this one as well with no extra steps.
Please refer to the base model for more information.
---
Erratum (23/01/26): Addition of a bigger size for the dirt and the soil