1 / 3
Raspberry Pi Modular Case with Noctua NF-A4x20 5V Fan
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular remix of the Rpi4B case designed to be use with a NOCTUA NF-A4X20 5V FAN by Pillar
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 346
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
I was looking for a Pi5 case that used the Noctua A4 5v fan and came across the original as a Pi4 model. I've modified as in the description as I wanted to be able to use for multiple models.
- Objects will need to be reoriented correctly
- %35 infill
- PLA
- brim on the bracket help but not necessary
- No supports required
The following screw are required:
- M2.5 screws for screwing the board to the bracket
- M2.5 screws for the front plate
- M3 screws for the rear filter plate
- Original fan-mounting screws that came with the fan for… the fan
Changes:
Revised to be more modular - changed the case to have an interchangeable front plate depending on Pi version
- Added brackets for Pi3b/Pi5
- Created front plates for Pi4b and Pi3b/Pi5
- Changed wiring passthrough to arch instead of triangle
- Added notch in backet so it will slide in all the way
- Added fillets for standoffs for a bit better support
- removed rib as it's not necessary