SKLEP mk1 rubber band adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part is inserted into the front to allow the use of common rubber bands instead of the para cord.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 347
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My kids had a great time building the SKLEP Mk 1, but when it came to firing it, the bungee cord we had just didn't perform.
We have plenty of rubber bands so we used it with a pen for a while. This made it super ugly! This little gizmo transforms the contraption back into a great looking gun.
Prints without supports, orient on the build plate on any one of the 4 flat hex surfaces. This should not be printed standing up! This was designed to be printed laying flat to maximize it's strength.
Video install instructions: