1 / 3
Victron Battery Terminal Cap w/ MRBF Fuse
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully covers the battery terminal even with an MRBF fuse holder on Victron batteries.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 374
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
I wasn't satisfied with how much of the positive battery terminal was still exposed after adding an MRBF fuse to my 12.8V, 330ah Victron battery. I could still ‘chubby knuckle’ a wrench and have it drop in a bad spot before the MRBF fuse.
The hex nut pattern may require slightly twisting the terminal nut to fit your install, but I was able to do that simply by hand.