115 modeli
An enclosure to house a Victron 275A Battery Switch and Victron 500A Smart shunt, to be coupled with other modules of the lynx distributor, made from the original Victron Lynx Shunt VE.Can enclosure model. I made this model for my own…
Another little helper for your power wall. Connecting a smarthsunt to the Lynx on the female side via 30 mm copper bar leaves some connections bare. Hence, a cover would be appreciated. Here it is, based on the original step file of…
Inspired on Victron Lynx - Rpi + 5" Touchscreen enclosure by RobrechtDR. But I had a lot of problems importing the STL into Sketchup, so I started again with the original Victron files.
in addition to my cover of the shunt https://www.printables.com/model/255704-cover-for-victron-shunt I created a cover of the terminals of the shunt. print instructions variable/adaptive layer height is nice to make rounded edges look…
You need two of these to mount your Cerbo on a DIN rail. In addition, 4 M4x10 / M4x12 or 4mm sefltapping screws are required
So the LYNX BUS power supply module without LYNX Shunt or LYNX BMS is complete (let's call it LYNX PowerIN for example 😃). Of course, the information about a blown fuse is not transferred to Cerbo, only the saltpeters in those LYNX…
This is a cover for the victron shunt. I didn't like the openness, so I designed the cover. As Material I used PETg. No special print instructions … Please note: this cover is flush with the contacts of the shunt, do NOT use washers UNDER…
A fan-cover with two 30x10mm fans for cooling of a Victron Orion-Tr 12|12-30 unisolated DC/DC-converter. (v3) New version with mounting holes (fits M4 bolt) and four openings for passive cooling when the fans are off. (v5) Yet another…
This is a remix of the other top from RobrechtDR. It uses the same bottom which houses a Victron Smart Shunt and Battery cutoff switch. The main difference is that I've flattened the top to make it easier to print.
This Victron Energy 500A shunt is the newer (IP65 version, released 2023). I think the older non-IP65 version has the same bolt hole spacing, so this cover should work on that one too. This is a simple cover to protect the 10mm hex bolt…
Just print it and cover your unused Ports on your bus bar. This is especially useful for busbars mounted upside down
Ein wand Halterung für eine Display GX Touch 50
I uploaded the entire project in both STL and 3MF format and it can be found in the project: Victron Energy LCD Box
10mm fan mount for the Victron Orion 12/12-30 DC charger to help out with cooling. Can fit anywhere from 1-3 fans, and bolts in securely using factory hardware. Also available to purchase on Etsy:…
I have been running Victron Venus OS on a raspberry pi to manage my Inverter, Solar, Batteries, etc in my Fifth Wheel RV. I decided that I needed to create my own case as I added a 6 port relay which integrates into the Venus OS and…
Victron Energy MPPT WireBox There are various sizes available: MPPT WireBox-S 75-10/15 MPPT WireBox-S 100-15 MPPT WireBox-S 100-20 MPPT Wirebox-M 100-30/50 & 150-35/45 MPPT WireBox-L Tr 150-60/70 & 250-60/70 MPPT WireBox-XL Tr 150-85/100…
An enclosure to house your Raspberry pi 3 or 4 running Venus OS and a DSI 5" touchscreen, to be mounted next to other Lynx modules, made from the original Victron Lynx distributor enclosure model. I made this model for my own using and…
A remix of the mentioned model by Gurnarok to handle the UART adapter for Victrons VE.Directs by Duppa . Prints with supports for the holes. Small standard torx screws necessary. For more information see…
Aufputzadapter für Victron GX Touch 70 Display, damit das Display direkt an eine Wand montiert werden kann, inkl. Auslass für das Kabel unten. Mit Fusion 360 erstellt, bei Bedarf kann die Datei verändert werden, damit z.B. das Kabel an…
Boite de fusible Victron MegaFuse de rechange. Si vous utilisez mes Gcode ou 3mf, l'ordre des couleurs pour le couvercle est : Blanc => Noir => Bleu Victron MegaFuse spare box If you use my Gcode or 3mf, colour order for the cap is :…
This is my try of making a DIY Victron MP2 compatible DC-distribution. It's based of a 40x8mm copper rail which can carry according to DIN EN 61439 1300A. The whole design is inspired by the Victron Lynx but with the requirement of…
Simpleholder to surface mount a BMV-712 (Or 712 Bluetooth) module on a wall. I was not ready to install it in the wall yet so this was a temporary solution but could be used in other applications where installing through a wall is not…
Case Victron SmartShunt 500A
Lynx Cover wicht Grommet: covers the red an blue ruber cover of the lynx Lynx Cover BusBar: covers the bare busbars of the lynx
The little spacer used to space uit Lynx modules, modified to fit over 3D printed modules. 2 needed per module. Look at my other 3D models for other Victron Mods.
This is a cover for the positive and negative busbar of the Victron Energy Lynx Power In 1000. The cover simply clips on top of the busbar, a small stretcher prevents it from sliding off when mounted in vertical direction. Preferably…
I needed to mount a Victron SmartShunt inside my Baddeley MKIII Astromech droid, but I found it would be easier to make the connections if it were rotated on its side, and I didn't want to drill into either the body wall or the floor to…
Victron 500A Smart Shunt
These prints help tidy up Victron VE.Direct / MK3 - USB cables on a wall/backboard. With them, the Victron cables can be mounted directly to the wall/backboard or on a matching pedestal. The pedestals raise the cases above the…
This is a cover for a Victron Battery Protect BP-100 low voltage protection, so that something does not close short by mistake. The cover can be easily put on the terminal screws. Dies ist eine Abdeckung für einen Victron Battery Protect…
Terminal Cover for the Victron Smartsolar/Bluesolar MPPT. Tested on 150/70 -Tr VE.Can. Should fit on all similar units from 150V to 250V. No supports needed.
Victron Energy LCD Box with Raspberry Pi 4
As per the title, elevates the Cerbo unit to provide space underneath to pass cables through, saving space and providing a meater layout. Most materials woud probably be ok, except PLA as it may get warm depending on your setup. Best…
Cerbo GX Enclosure Top v1.4 Cerbo GX Bottom v1.4 An edited version of the Victron Lynx case for Cerbo GX. I specifically made this to accomodate a USB device, HDMi Cable and RJ45 connector. This version (198mm x 160mm) is printable on a…
This is a cover for a Victron 500A Smart Shunt. It has been designed with the cables coming out in a specific direction (as seen in the photos). However, if the cables on your system come out in another direction you are welcome to vary…
This is a remak of @Brian_305444 to fit up to 3 fan 40x40x20mm for better cooling sytem. You need to print also 2 10mm spacers to put under the Orion DC charger
DIN rail (35mm top hat rail) mounting bracket for Victron SmartShunt. After print, assemble and cut M6 threads in holes.
120mm fan bracket for the EasySolar from Victron. Mounted directly on the cable / case cover and significantly improves the airflow Used self-tapping screws as the distance between the holes on both sides of the ventilation slots is not…
Victron Lynx is a nice & tidy system, but I feel that it is money-oriented Why? - Lynx PowerIn can be easily transformed into a Lynx Distributor (with no LEDs) - Lynx Distributor takes power from the Lynx Shunt. - Lynx Distributor has…
Just print the case and the caps for the unused ports. This prevents that the ports get dusty. Prints without support.
Protective cover for the Victron Energy BMV 500A shunt (e.g. as used in the BMV712). I have provided covers for cable side exit (as used in my own setup) as well as rear and front exit alternatives. Print Settings Rafts: Not needed…
Printed a external fan mount for Victron Multiplus II and wanted to secure the fans. (link to the fan mount: https://community.victronenergy.com/questions/191916/multiplus-ii-5000-fan-noise-fixed-for-me-without-l.html ) The fan guard fits…
Hutschienenadapter zur Montage des Victron Credo GX.
The same 3d model as https://www.printables.com/model/1453174-din-rail-bracket-58mm-heat-insert-screw-version
This is an alternative to the official CCGX-Case. It fits perfectly and I recommend printing this in PETG. Color Control GX Official wall mount Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: Yes…
Da der Victron Solarladeregler bei 40 Grad seine Leistung drosselt wollte ich ihn aktiv und leise mit einem 120mm Lüfter kühlen. Die Lüfterhalterung lässt sich einfach in die zwei Verschraubpunkte schrauben die für das Display vorgesehen…
Adapter für Victron GX Touch 70 Display. Damit ist es möglich das GX Touch Display auf einer Tablethalterung zu montieren. Dieses Teil ist für folgende Tablethalterung konzipiert: https://www.amazon.de/gp/product/B09XM9KRRT/ Das Teil darf…
Victron Energy Cerbo GX bracket for Scame box (SCABOX) 686.208 (240 x 190 x 90 mm). Category: Electronics
Use a strong filament for the back plate, as PC, PETG, etc For the blue face, you can use any filament. Use supports! A list of parts HERE The closest colour match I can find to the original Victron colour seems to be (I did not have that…
This model is splitted in two parts. You'll need 4x M3x10mm countersink screw to assemble it to the GX Touch 50.
Victron Cerbo GX - Box cover Cables holes for 1 RS485-USB Cable (Energy Meter) 1 BMS Can Cable (Batterie BMS) 1 VE Can (MPPT) 1 VE Bus (Multiplus) Edit 31/05/2025 : New version with some fillet and reduce holes size
Support ventilateurs pour MPPT ou ORION Victron Energy. Ventilateurs diamètre 30mm.
Mounting plate for the MPPT 100|20 to mount it on existing holes for the lower-powered MPPT models (75|10, 75|15). Print it with PETG, as it may get too warm for PLA. You need to add 4x M3 threaded inserts.
Sometimes it is necessary to mount the Victron Battery Switch 275 A higher on the wall or other surface. 20 mm and 25 mm. Printer with 10 % fill.
A simpel bracket to mount the Victron Smartshunt 300A to a wall. I don't know if the 500A version will fit.
Simple shunt cover for the open-frame Victron 500A Smart-shunt in a straight-through cable configuration. Parametric FreeCAD file included for customization.
This is a detailed model of the Victron Battery Switch 275A 60V switch. I measured a physical switch with calipers and modeled the switch in CAD. The .step file contains the whole switch with original bottom plate, as well as a 3d…
Fanshroud for newer models of Victron Multiplus 2 48/5000
This battery has very exposed battery terminals where regular covers don't fit it well. These cover them nicely. I used 16mm2 wires, much bigger probably won't fit.
A simple fan-mount to blow over the cooling fins of a Victron SmartSolar 100|20 (fits other models too). Needs space below the device of about 70mm. The holes for the fan fits some rubber stands I got with a Noctua fan. Category:…
Designed for the Victron Lynx Distributor M8 (not sure if it fits in the M10 version). Provides two slots in the back to allow smaller gauge wire to be run out the back end without opening up the whole back end of the device. Includes…
I wasn't satisfied with how much of the positive battery terminal was still exposed after adding an MRBF fuse to my 12.8V, 330ah Victron battery. I could still ‘chubby knuckle’ a wrench and have it drop in a bad spot before the MRBF fuse.…
A backing plate with built in spacer for mount a Victron touchscreen to material as thin as about 3mm. Used to mount to 4.5mm laser cut acrylic.
Model includes body and cover. To connect them together you are going to need 3mm screws
Victron case for Cerbo GX thats been optimized for 3d printing. This is printing at an angle, you need a clean good build plate. CLEAN YOUR BUILD PLATE!
This is a standoff created for the Victron MPPT 75/10 charge controller. It is designed to provide 30 mm of standoff behind the heat sink of the controller and mounting in an enclosure. The "plate" is the portion that attaches to the…
easy to print VE.Direct frendy (a.k.a you can connect cable) BMV 7xx holder
This is a 3D-printable enclosure designed to house a Victron2MQTT PCB and a Wemos D1. The case consists of two parts: a bottom housing and a snap-on top cover. The design includes ventilation slots for heat dissipation and mounting…
Victron Smart Battery Protect 65A
When upgrading from AGM to LiFePO4 the old Nasa BM-1 battery monitor needed to be changed. The Victron BMV-7xx seemed like a good choice, but it is much smaller than the old battery monitor, so I created this adapter. The model has been…
This is a 3D-printable enclosure designed to house a Victron2MQTT PCB and a Wemos D1. The case consists of two parts: a bottom housing and a snap-on top cover, making assembly easy without the need for screws. The design includes…
EN: Hi guys, i created a simple model for my Victron Blue Smart IP65 12/25 car battery charger. The charger itself has four mounting holes, but i don't use them because of “mobility” reasons. I need to unmount the charger of the wall very…
Die Polabdeckungen sind auch für etwas längere Anschlussschrauben geeignet und gewährleisten auch mit diesen eine sichere Polabdeckung. Die Polabdeckungen greifen über die Verteilschiene und rasten ein. Zudem sehen sie in Rot und Schwarz…
This is a remix of original model here https://www.printables.com/model/892072-victron-lynx-power-in-busbar-cover
An addon to the Victron Lynx Power In
I wanted a method to attach the SmartShunt directly to a 120Ah battery. The main issue I faced was the large 10MM bolts on the shunt. The battery terminal was 8mm, and the accessories I connected were also 8mm, rather than a bunch of very…
I have several Victron devices hanging on one wall. I lasered labels to label them. Since my inner "Monk" likes to have the labels straight and at the same distance from the edge, there is this little helper.
This is an optimized version design for easy 3d printing. The original isnt the best for printing as it will use lots of supports due to a lack of flat surfaces. This version has been designed to print at 45* with a little tree support.…
I was looking for a battery cap, that fits to the Victron SmartLithium Battery 12,8V/200 Ah.
Victron battery protective cap for 12 V battery
A simple spacer to get more clearance for the cables at the backside of the Vitron Ekrano GX when mounted within a cable duct. In my case a cable duct of 130mmx60mm. May be used also as cutout template. If 3.5mm isn't enough in height…
This was designed to replace the hole left by a Go Power solar controller. It will fit a Victron MTTP controller and a 4-port USB outlet. This was designed for a Geo Pro travel trailer RV, but should work for any camper. Print Settings…
Some protection for your SmartShunt from accidental shorting. Print in PETG or PC.
Batterie 48V Switch connections protection 22/12/2025 new version 2 colors and fillets all arround
Aus Platzgründen musste ich meine Victron Orion TR DC-DC Wandler 48V/48V 6A ( Orion-Tr DC/DC Konverter, isoliert: - Victron Energy ) übereinander befestigen. Dieser Halter ermöglicht es 3 der DC-DC Wandler übereinander zu montieren,…
To house a simple solar charged battery for light use like electrical fencing or a small light source like a led strip in semi outdoor environment. Cells: CBAK 32140FS - 15Ah - 15A LiFePO4 - 3.2V A-Grade Solar charger: Victron SmartSolar…
Created this model to mount a Victron Energy 12/500 120V inverter in place of the stock inverter.
Couvercle pour Victron battery protect 65A
Quick connector for multiple batteries. You need the power pole 45A connectors. Uses 4x rs components RS278-534 - M3 Brass Threaded Insert diameter 4mm Depth 4.78mm Wires used - tinned 4mm squared. Wire rated at 32A max. Originally used…
Victron GX Touch 50 Custom Wall / Surface Mount Bracket Custom-designed mounting bracket for the Victron GX Touch 50 display panel. Created as a clean and sturdy solution to mount your display onto walls, cabinets, or control panels in…
Terminal Cover for the Victron Smartsolar/Bluesolar MPPT. Tested on 250/100 -Tr VE.Can. Should fit on units with 100A rating.
Simple spacer to go underneath these reasonable bus bars. Designed for two purposes - allow wiring to pass beneath the bus bar and to height match to the smart shut so that copper flat can be used for high amp interconnects. Pass through…
Cover to be used in addition to the silicon covers provided by Victron. I was looking for a more finished look compared to the ends of the busbar just sticking out. The cover can be screwed to the backboard with a 4x30mm screw.
Moved things around and added a pre-charge button and led to it. Had to get creative with the busbars to make it fit, not the prettiest busbars. button: https://s.click.aliexpress.com/e/_c40G5HgV light:…
Victron Venus component case which it made of 4 pieces, glued to the wall with silicone Victron Venus component case It is made of 4 pieces, glued to the wall with silicone (probably in another version I will also make some clips). I did…
Mount for Victron Smartsolar (MPPT) on opengrid multiconnect rail. I use a MPPT 100|20, which has the same size as devices with similar power. If you use a larger MPPT or Multiboard, you can change the FreeCAD file. For the second part,…
🇩🇪 Beschreibung (Deutsch) Halter für das Victron MK3 USB Interface zur Montage auf einer Hutschiene (DIN-Rail) . Der Adapter ermöglicht eine saubere und sichere Integration des Interfaces in Schaltschränke oder Verteilungen. In das…
Victron Lynx Standoffs for levelling the Lynx, smart shunt and BEP switch. FreeCAD source file included
This block is a back plate for mounting a Victron Smartshunt on an enclosure. The block is placed on the outer surface of the enclosure to provides both security and stability. Drill 2 holes 100mm apart and place the shunt inside. The…
