Victron BMV-712 Battery Monitor Surface Mount Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple holder to surface mount a BMV-712 (Or 712 Bluetooth) module on a wall
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 205
- Wydruki
- 0
- Wyświetlenia
- 1444
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Simpleholder to surface mount a BMV-712 (Or 712 Bluetooth) module on a wall. I was not ready to install it in the wall yet so this was a temporary solution but could be used in other applications where installing through a wall is not feasible. In the photos the model you see is the model with a thinner wall, once sliced it left those open traces down the side of the screw holes. the regular version I also uploaded has thicker walls and should not have those. This was designed to work with 4 #8 Screws, with open sides to tighten the screw on the back of the unit and a corridor to pass the wire through. No supports or special print parameters are needed. I printed out of PETG to be safe for temperature
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
200
Infill:
20
Filament:
PolyMaker PETG
Category: Hobby