Victron BMV-712 Battery Monitor Surface Mount Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple holder to surface mount a BMV-712 (Or 712 Bluetooth) module on a wall
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 205
- Makes
- 0
- Views
- 1,444
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Simpleholder to surface mount a BMV-712 (Or 712 Bluetooth) module on a wall. I was not ready to install it in the wall yet so this was a temporary solution but could be used in other applications where installing through a wall is not feasible. In the photos the model you see is the model with a thinner wall, once sliced it left those open traces down the side of the screw holes. the regular version I also uploaded has thicker walls and should not have those. This was designed to work with 4 #8 Screws, with open sides to tighten the screw on the back of the unit and a corridor to pass the wire through. No supports or special print parameters are needed. I printed out of PETG to be safe for temperature
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
200
Infill:
20
Filament:
PolyMaker PETG
Category: Hobby