Liczymy pasujące modele…
Update 06.06.2024: Correction of a painting error on the model with black hood. Update 26.05.2024: Added two version for 4-color multicolor print (AMS & MMU). With white hood and with black hood. Summary This is a model of a Toyota…
Wedges to raise the view of the rear camera for full time use as a rear view mirror. For full time use, a software mod cam be purchased from Mid City Engineering. I printed these with PETG for durability and heat resistance. ASA would…
This is a robust cupholder attachment/bracket for the front cupholders in a Mercedes-Benz Sprinter van. It has holes for #10 wood screws so you can attach whatever size/material of tabletop you want. The cupholder portions have 1"…
As the name states its a halfdart pusher for the nerf sprinter
Sprinter Van - Rear Door Magnet Bumper Housing - (T1N 2002-2006) Replaces Mercedes Sprinter T1N | Part Number: 901 740 03 16 (not exact match but it works) Designed this replacement after the original cracked from rust expansion. Pause…
imprimer en ASA, coller avec Sikaflex, l'entré du fils est enligné avec le cap en plastique sur le véhicule. Parfaitement enligné pour vision rapproché avec camera de recul Wolfbox (Amazon). Toujours satisfait après 5 ans.
This is a robust cupholder attachment/bracket for the front cupholders in a Mercedes-Benz Sprinter van. It has holes for #10 wood screws so you can attach whatever size/material of tabletop you want. The cupholder portions have 1"…
The trim rings that hold the door, wall, shower, and trim panels onto the Jayco Terrain and Entegra Launch Mercedes Sprinter Van RVs are cheap and thin plastic. These models provide a thicker, stronger retention to replace the OEM pieces.…
UPDATE 3/16/25: I found that the added weight of using the extension arm causes the mirror to rotate forward at the location where the extension arm and the OEM arm kit attach. To remedy this, I have added two new parts, the “Mirror droop…
Designed for the Euroimmun Sprinter XL. This is an emergency stop button shield to prevent accidental actuation. The emergency stop button is accessible and can be turned and pressed but now it is covered to prevent accidental actuation…
We have excess amounts of these 15mL 20mm tubes we used in the Dynex DS2. They can be used in the Euroimmun Sprinter XL but sit precariously in the machine. I created this adapter so the tubes can be centered and sit securely in the…
A hard case for the NetAlly LinkSprinter LS300 Pocket Network Tester. I bought mine used so it didn't come with the soft protective cover. I hope to improve on the original soft cover by including a space to store the two AA batteries…
A design for a brake handle, based on the Class 150 Sprinter DMU units of the UK but also found on many UK multiple units, to be used on a 6mm splined shaft potentiometer / rotary encoder such as found on the cheap chinesium macropads…
The VS30 has a deeper panel for the switches and they're not round on all four sides. Print Settings Printer Brand: Bambu Lab Printer: Bambu X1C **Rafts:** No Supports: No **Filament Material:** PETG Category: Other
These are replacement dash vents I made for the T1N Dodge or Mercedes Sprinter. These are left and right sides that fit both drivers and passenger sides. They are labeled L1-L6, R1-R6. There are also a set with a hole on one side to use a…
Holder for an iPhone 13 ProMax that fits into the slot in the dash on the passenger's side. It can be mirrored in your slicer if you need it for the driver's side. The fit is tight so the phone will not vibrate. There is a slot in the…
A really excellent model to provide additional large cup holders for Mercedes Sprinter Vans. This works with any late model Sprinter, and RV vans like Revel, Terrain, Launch etc. The mount is separate from the cup holder and is attached…
I have printed them standing on the bottom without support, I have made them in Petg for extra durability.
Handyhalterung für die Öffnung im Mercedes Sprinter mit Kugelkopf 17 mm für Halterung von z. B. Josh Für andere Seite einfach spiegeln. Infill 100 % und 0,2 mm Druck
The dashboard cupholders on Mercedes Sprinter vans are pretty much useless for cups. On long trips, we need more cupholders (coffee, water, sunflower seeds etc.)! This model makes the small cupholders useful by offsetting a larger cup…
With this Adapter you can mount a PanelPilot SGD 43-A HMI Touchscreen in a Mercedes Sprinter.
Ersatzteil Sonnenblenden-Scharnier für den Sprinter W906 von 2006-2018.
These cupholders are big enough for most cups. Can easily fit a can that is inside a YETI coozie with some room to spare. Also has pen holders build into the space. sprinter-cup-base-cups-1.1 - Best version, clean.…
Na zaznačené plošky přilep kousek gelové oboustranné pásky a rázně zasuň do otvoru v palubce. Pro otvor na levé straně zrcadli model ve sliceru. Rozteč děr sedí pro RAM držáky. Verze pro vruty, pro šrouby a kulový úchyt na držák vysílačky…
Badge for Mercedes sprinter rear door ( tested on Sprinter 313cdi )
Here is my latest project, a remaster of this Mercedes-Benz Sprinter van that I shared on other platforms a few years ago. I updated the bottom to make it flat and added some little details. I also created a new multi-color version for…
2002 Sprinter kitcard Its designed in a way so you can open, or close the backdoors. At this tiny ratio the hinges are not the best.. Its more likely you either put the doors on as open, or as closed.. I will rework it in the following…
Replacement/upgrade flywheel cage for the N-Series Sprinter. 41mm spacing for improved performance over the 42.5mm cage in the post I remixed. I'm getting about 125fps on valkyrie motors, worker smooths and the 6 AAs from the stock…
These switch covers for the Mercedes Sprinter W903 offer a snug, secure fit—requires firm pressure to install properly. Printed in ABS-GF with 3 walls, 15% gyroid infill. Supports optional, but recommended for best results. Available in 3…
This is a set of conversion parts for the Nerf N-Series Sprinter that allows for the use of half-length darts and talon mags. Features: Minimal hardware required Integrated PCAR on flywheel cage Full dart guide for more reliable feeding…
Mercedes Benz Sprinter Switch Cover (Schalterabdeckung)
Moldura do radio sprinter modelo 2002 modelo alongado para adaptação de radio com tela multimidea, utilizar retifica.
This is a cell phone holder for an iPhone 14 with an Otterbox case. You need a Threaded sleeve m6
This is simply a scaled down remix, 96% of the original. I've also included a version with 12mm opening for the cables to come through on the driver's side.
I printed a similar fitting model which had a ball as part of the print, the ball broke while driving on rough roads. https://www.thingiverse.com/thing:6937330 So I created my own, similar but with air vent like slats to attach an air…
This replaces the 2 switch blank switch bank, to fit a single carling type rocker switch in its location.
Tool for detecting leaks from exhaust manifolds and intakes.
Important: you have to relocate the Airbag Sensor to fit these Enclosure. I dont take any responsibility for using this Prints/Parts in your car. You build this at your own risk. The doorpanel has to be modifed. I will ad aditional parts…
Threshold and floor caps. Created on the basis of the original cap, but without an indentation due to the orientation of the print. Printed from TPU
The switch must be glued in place, as there is not enough space for the lock nut. For best results, print in PETG to ensure sufficient flexibility for the clips.
This is a universal holder (mainly for smartphones) designed for the overhead storage compartment of the Mercedes Sprinter. It simply snaps into place and stays securely mounted. The angle is optimized to be perfectly perpendicular to the…
After a long search, I couldn’t find any good solution to mount a smartphone or other devices due to all the rounded surfaces in the car. So, I removed the air vent (it’s just a snap fit) and took off the decorative ring — that’s where my…
Hi, I'm offering the clip that holds the seat securely in place for a Mercedes Sprinter from 2018 and later, which is prone to breaking. Ideally, print the part in ABS/ASA with an infill of over 50%. Carbon fiber reinforced plastics are…
Hitch for Bruder Sprinter 2672 Kemping - spare parts Bruder 42675
The original screw caps on my Mercedes Sprinter kept falling out and getting lost. These printed caps cover the screws well. I recommend PETG or ABS, as it can get very hot in the car. The tolerances of the screw holes and caps are not…
Sprinter Van - Rear Door Magnet Bumper Housing - (T1N 2002-2006) Replaces Mercedes Sprinter T1N | Part Number: 901 740 03 16 (not exact match but it works) Designed this replacement after the original cracked from rust expansion. Pause…
imprimer en ASA, coller avec Sikaflex, l'entré du fils est enligné avec le cap en plastique sur le véhicule. Parfaitement enligné pour vision rapproché avec camera de recul Wolfbox (Amazon). Toujours satisfait après 5 ans.
this is a Template for over head cupboards in a 2013 Mercedes sprinter hopefully it helps some one as it did save me a ton of time. please note this is uploaded and created to benefit the community free of charge I do not give permission…
Printed in TPU @0.25mm layer height at a 45 degree angle to avoid flat spot. Also used Fuzzy skin Voronoi to approximate the seat plastic texture. Mirror along the X-Axis for left and right side. The bumper slides snuggly at the end of…
I edited the original file so that it now has a cup holder on the left side.
Adapt DS2 Zeus QC and CAL tubes for use in the Sprinter XL. This is a simple 16mm collar for the 10mm QC and CAL tubes. I don't have a picture of it in action but just trust me on this, it works. Also, if you're reading this, you're…
The tether that keeps me from losing the fuel cap on my Mercedes Benz Sprinter dried up and finally broke. As I have been known to leave fuel caps on the vehicle after fueling and drive off, I decided I better come up with a replacement.…
A sleek, compact vertical stand designed specifically for routers (compatible with Keenetic models: Racer, Sprinter, Challenger, and Hopper). This minimalist stand helps declutter your desk by orienting the router vertically,…
Couldn't find a retail option to mount a new fan and everything was made for the Maxxfan Deluxe which is a different size. Couldn't use Butyl tape because of the rough texture of the raptor paint (I don't think so anyway!). This model is…
Mercedes Sprinter van model shell. Hollowed out remix with extra reinforcements for the side view mirrors. Built around a 133.5mm crawler chassis. Printed upright with internal supports but could save a lot of print time and material by…
New push-to-open door knob to open the sliding door on the Sprinter. (I did actually buy the replacement handle, but it broke almost immediately because the cheesy little plastic tab intended to push on the latch couldn't handle the…
Hub Cover for Sprinter W902-5 Print Settings Printer Brand: Creality Printer: CR-X Rafts: No Supports: Yes Resolution: 200 Infill: 30% Filament: SUNLU PET-G Black Notes: Perimeters(Wall Line Count): 6 Category: Automotive
These are mounted on all the covers in the rear of the van. I do not advise PLA (hot in the van) , But PETG with a max amount of walls is the way to go. Happy printing and fixing !
A Toyota AE86 Model available for the open Z chassis V16 Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: Yes Supports: Yes Resolution: .15 Infill: 10% Filament: Does not matter PLA Does not matter Notes: advisable printing…
I bought an Atoto S8 car stereo for my Ducato camper and I needed a place to install the two USB ports. In Atoto box there was a two-ports USB cable included (check image) but nothing to hold it in-place. I designed this component to…
English below Meine Idee war es, die Innenleuchten des VW Crafter auf LED umzurüsten. Dabei habe ich nicht einfach nur eine LED-Leuchte eingebaut, sondern einen Träger gedruckt und diesen mit LED-Streifen versehen. Zum Einen sind die…
Ich wollte die Innnenraumleuchte vorne zwischen Fahrer - und Beifahrersitz auf LED umrüsten. Sie war mir einfach zu schwach. Ersetzt habe ich die Glühlampe durch LED-Streifen. Hier kann jeder durch die Anzahl der LED skalieren, wie hell…
Never use it with real candles! It's made for electric candles. 0.2 layer height, 0.4 layer width Took me around 20 hours to print. For the best fit use the setting “Slicing Tolerance” Exclusive in Cura. I designed this as a part of…
I bought an Atoto S8 car stereo for my Ducato camper and I needed a place to install one of the two USB ports. In Atoto box there is a two-ports USB cable included but nothing to hold it in-place. I used one USB port for DAB adapter…
Allows you to have bigger diameter cups. PLA works fine, but over time, tends to shrink a little. Best printed in heat-resistant filament e.g. carbon-fibre nylon.
This is an iphone12/iphone12 pro with Case mount for a Sprinter 2019+ (VS30). Inspired by another mount but redesigned from scratch to make it easier to print and remade for the iphone12/iphone12pro. Print instructions 15% infill, in PETG…
Doorstop for a Mercedes Sprinter side door. Stops the door halfway (or where ever you want it to). Attaches to roller track with double-sided tape and acts as a trap for the door roller. Door can be pushed over and past the stop to fully…
I recommend printing it with PLA. and dont worry because of the heat. the position of the mount doesnt get too much sun behind the dashbord. at least here in germany :D. i use mine for a good 6 months now and it works perfekt to me. Enjoy!
So I created this insert for the bottom storage shelf of the center console. It is a press fit and holds the phone securely, + has space for three pens.
Easy solution to fasten the panel to the door again, it took more time looking for it than drawing and printing it. Now the van door closes correctly and you don't see a broken van, just an old one, but with a lot of life ahead of it. I…
Used to mount 30mm wireless speed sensors to exercise bike. The flywheel didn't have a hub to mount the sensor to, so I designed this Thing. Meant for a Sunny Heath Asuna Sprinter 6100. May work for others. Print Settings Printer: Rafts:…
Replacement part for a Mercedes sprinter van seat adjuster. You may want to scale it depending on your tolerances. Probably want to print it in PETG at least to have it survive in a hot car. Step file included if you want to make any…
I made this because the small cupholder on the Mercedes Sprinter is USELESS. This adapter makes the small cupholder into the normal size one. It also includes a slit for mugs. Holds up to 4 lbs. which is a standard large water bottle full…
I wanted to keep my factor interior lighting from my Mercedes Sprinter Van as I build it out as a camper. I created an adapter to remix into various housings around the vehicle and thought I'd share for others to build their own housings…
Flat side down, I printed one in white to test, but you should print it in black
Jedná se o první verzi tohoto vozidla, slibuji, že časem to předělám do lepší podoby.
Water tank cap for W639 that is ideally printed in TPU. Inner most diameter is 74mm. That is the exact size of the original part. Print advise: The fit is a tad loose when using TPU. You might want to print at 98% size in the slicer. (As…
US Coin Organizer for a 2023 Mercedes Sprinter van's dashboard cupholders. 2 slots for quarters, 1 for nickels, dimes, and pennies. Photos are of an earlier version, I adjusted the finger slots to go all the way through to make it easier…
This eyelet recess is a replacement part for the W906. Since the recesses tend to rust and the replacement parts are expensive, I have created a cost-effective alternative that any 3D printer owner can print themselves. This model was…
Die neuen Sprinter nach 2019 haben keine Becherhalter mehr, in welche Tassen passen. Als ich das Modell für den Papbecherhalter gefunden habe, habe ich es angepasst (Den runden teil vergrößert, eine wölbung mit einer kleinen führung…
The Garmin holder is srewed to the stl-part with 3 3,5*30mm woodsrews
Replacement key blade to be used in a Mercedes Sprinter fob.
biellette de réparation pour bouche de ventilation
I needed storage for shoes in my Winnebago Revel which is a 2021 Mercedes Sprinter 2500. This mounts to the back of the passenger seat base. It requires: 2 M5 (5x5.8) inserts 2 M5 screws 4 self-tapping screws The model was too large to…
Had a friend that needed some replacement curtain clips for his Sprinter Van. Using some calipers and Tinkercad I created a Beefed-up version of the cheaply made factory acrylic clips. Printed with PETG @ 100% infill for flexibility and…
