Atoto USB two-ports insert for Fiat Ducato/Citroen Sprinter ligher hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I bought an Atoto S8 car stereo for my Ducato camper and I needed a place to install the two USB ports.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 206
- Wydruki
- 0
- Wyświetlenia
- 2137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought an Atoto S8 car stereo for my Ducato camper and I needed a place to install the two USB ports. In Atoto box there was a two-ports USB cable included (check image) but nothing to hold it in-place.
I designed this component to replace one (of the two) lighter with the two USB ports.
Cable can be routed inside insert and USB ports pushed inside holes.
It does not need glue as the shape fit perfectly to hold connector in place.
You can disassemble Ducato dashboard with a single screw and a plastic tool.
Use a cutter to adjust the pins that keeps insert in-place.
Please share your photo.
Bye
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
Yes
Infill:
20%
Filament:
FiloAlfa Alfa+ PLA
Black Metal
Notes:
These are the settings I used, different settings may work too.
Support are needed only if you print facedown for better surface definition.
Category: Automotive