Wolfbox front camera mount for Mercedes-Benz Sprinter Van VS30 (W907)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter allows to attach a camera to the center of the Sprinter front grill pointing downward.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Printed in ABS @0.3mm layer height, 4 wall loops, 25% infill.
Held in place by two screws in the front and two zip ties in the back.
The camera is stuck in place by the double sided tape provided by Wolfbox
See screenshot for printing orientation (the supports are not strictly necessary, I added them for safety.
I ended up using the 40degree angled version, that at the closest shows 28 inches (71cm) in front of the bumper. Once the camera is glued, it is tight to put it in place, but it works with a little bit of force. Remove the three top screw of the grill in order to install the zip ties. Also use a very low profile bit holder to tighten the screws. You may need to enlarge the holes depending on the screw type you use. Alternatively, very good two-sided tape or glue could be used.
I also provided a 30degree version if you want the camera a bit straighter.