P
Printables
Wolfbox MF100 Multiboard/Multiconnect holder
I printed in pla 0.3 layers i removed infill from the “front” of the “wings” so it'll be more “snappy” required atleast 1 multiconnect connector (2 recommended)
Wyniki wyszukiwania: wolfbox
Liczymy pasujące modele…
P
Printables
Wolfbox MF100 Gridfinity-holder
A Gridfinity 1x2 holer for Wolfbox MF100. I did use reference from other Author
P
Printables
custom attachments for WOLFBOX MF50 Electric Air Duster Jet Fan
Summary Customized attachments for the Wolfbox MF50 dust blower for individual areas of application (keyboard, notebook cooler, all types of filters, etc.) Print 0.16mm layer height 3 outer walls / perimeters 15% infill supports are…
P
Printables
Wolfbox MF200 gridfinity storage
This Gridfinity storage solution is designed specifically for your MF200 Air Duster and its attachments. The 5×3 box holds the Air Duster itself. The 5×2 box is made for the nozzles and attachments. Both boxes are available in two…
P
Printables
Wolfbox MF200 Nozzle Lock Mechanism
This model gives you the basic locking mechanism for nozzles. Attachments snap in place with a small twist, so you can easily build and adapt your own custom designs.
P
Printables
Wolfbox MF200 Model
This model represents the Wolfbox MF200 Air Duster and is meant as a reference for creating your own holders, mounts, or accessories. It helps you save time by avoiding manual measurements simply align your design to the model. Two…
P
Printables
Wolfbox MF200 Stand
This stand is designed to let your MF200 stand upright in a stable and tidy way. It's especially useful if you want to keep the device ready to use on your desk or workbench without it rolling around or taking up unnecessary space.…
P
Printables
Wolfbox MF200 whistle
Probably the most useless, yet loudest attachment for your air duster: just snap it on and let the deafening whistle do its thing. It doesn’t clean better – but it sure gets louder.Probably the most useless, yet loudest attachment for…
P
Printables
Wolfbox G900 Tripro Bracket Adapter 1/4"-20 to Ball Mount
This is a simple model to allow a ball mount adapter to be attached to the OEM mounting bracket of a Wolfbox G900 dashcam. My camera is a G900 Tripro, but this adapter will work for anything that has a 30mm x 30mm hole pattern on the…
P
Printables
Wolfbox rear camera mount for Super Duty 2017+
This mount just slips up behind the headliner. It allows you to mount a wolfbox rear camera inside the rear window. The short mount is used on either side of the sliding rear window. The long mount can be used anywhere, including over the…
P
Printables
Wolfbox MF50 Skadis nozzle holder
Used for wolfbox mf50 to hold nozzles on skadis board Print with supports! I used 100% infill, 0.2mm, with grid style supports, takes about 2 hour on mk3s
P
Printables
Magnetic Holder for Wolfbox MF100
Currently the slots in the back are sized for some random HDD magnets that I had around. The step file is included, so feel free to add wall mounting holes, a hook or whatever you need :)
P
Printables
Rugged box for the WOLFBOX MF50 Electric Air Duster
printed with bambu standard petg presets 30mm m3 bolts were used for the latch and the hinge
P
Printables
Gridfinity Tray for Wolfbox MF50 Air Duster
Flat design so it fits in my toolbox drawer. Prints well in PLA with low infill.
P
Printables
Air Duster Holder – Wolfbox Air Duster Stand – Designed for Honeycomb Wall Storage system
Shelf to store the Wolfbox air duster on the Honeycomb storage wall.
P
Printables
Wolfbox G900 Pro Rear View Cam Cover
Wanted to mount my rear view camara for my wolf box dashcam on the outside of my car to replace my rear view mirror as it gives me a far better field of view but didn't want to leave it completely exposed, found a few designs but they…
P
Printables
Ineos Grenadier Wolfbox Bracket
This is a custom mount designed for installing a Wolfbox in the Ineos Grenadier. When mounting the Wolfbox on the original Rear-view mirror, the cables have insufficient space and the overall setup appears bulky. To solve this issue, this…
P
Printables
Wolfbox MF200 female socket
I expect this should print pretty well with any filament with default settings. no supports or brim required. I've printed this in generic PLA and PETG and it always has a nice friction fit.
P
Printables
Wolfbox MF200 Vacuum
Caution, this can obviously break your tool if you attempt to vacuum objects with it. I made this mostly for laughs, but it could be useful to suck air out of bags before sealing, or maybe vacuuming if someone were able to come up with a…
P
Printables
Wolfbox camera bracket for an RV
This bracket is designed to adapt the Wolfbox 900 Pro camera to the back of an RV. It is for an Entegra Condor, but may fit other RVs.
P
Printables
Halter für Megaflow200 von Wolfbox
Für den Megaflow200 von Wolfbox benötigte ich eine Möglichkeit das Gebläse und die verschiedenen Düsen leicht zugänglich aufzubewahren. Die entworfene Befestigung kann angeschraubt oder an einer Skadisplatte befestigt werden. Die…
P
Printables
Wolfbox MF200 Multiboard Mount
Multiboard mount for the Wolfbox MF200 and nozzles. Print orientation; as is Print with supports.
P
Printables
Wolfbox MF50 holder
Holder for the Wolfbox MF50, design to fit IKEA SKADIS. Print with supports for the hooks. I used 15 % infill with 3 walls
P
Printables
Gridfinity 4x1 Wolfbox MF50 stand
Made my own version of gridfinity storage for the Wolfbox MF50 in a 4 by 1 gridfinity grid to save on the used area andi improve grabability. This fits perfectly in the deep Ikea Alex drawers.
P
Printables
Mercedes Sprinter Wolfbox Mirror Extension
UPDATE 3/16/25: I found that the added weight of using the extension arm causes the mirror to rotate forward at the location where the extension arm and the OEM arm kit attach. To remedy this, I have added two new parts, the “Mirror droop…
P
Printables
Replacement nozzles for wolfbox air duster
I accidentally dropped my wolfbox blower with the long nozzle attached, and managed to break one of the sliding tabs on the bottom that lock it into the base. So I grabbed some calipers and opened fusion 360 and got to work! 😆 I decided…
P
Printables
Gridfinity Wolfbox (MF100) Air Duster Holder
I found this great template and decided to make a holder for my duster. Pretty basic but seems to work.
P
Printables
Wolfbox MF100 Multiboard/Multiconnect holder
I printed in pla 0.3 layers i removed infill from the “front” of the “wings” so it'll be more “snappy” required atleast 1 multiconnect connector (2 recommended)
P
Printables
Gridfinity for Wolfbox duster
2x1 Gridfinity Magnets are 2x6mm. Pressure fit or glue in models included
P
Printables
Wolfbox MF100 Air Duster Case / Box
A box for the Wolfbox MF100 air duster and all of its accessories. Includes a notch in side of box to charge while in the box. I left it text free - emboss whatever text you might want on the lid using the slicer :) The hinges/latches…
P
Printables
NiteCORE Cinewind CW20 remixed tips like WolfBOX MF100
I purchased both the NiteCORE CW20 and the WolfBOX MF100. The NiteCORE quality is leaps and bounds better although slightly less powerful / cfm. I modeled the 12mm tip after the WolfBOX and still wasn't as happy, so I remixed the 10.5mm…
P
Printables
Gridfinity Bin for Wolfbox MF100 Electric Duster
I needed a way to store my wolfbox duster laying sideways so it would fit in the tool chest. Drew this little guy up in F360 to get the job done. 4x4 base and 10U high.
P
Printables
Miltiboard WolfBox MF100 Holder
WOLFBOX MF100 mount for Multiboard. Use Auto Tree supports from plate. Attach with 9 mm Small Thread, Flat Head, T-Bolt
P
Printables
Wolfbox 100 Nozzle for Keyboard Key Switches, and a Fine Tip Flat Nozzle
Sometimes, dust and debris work their way into a keyboard key switch, causing the switch to be 'sticky' or to repeat key strokes. You can try to blow out the mechanism, but most blower nozzles are too big and they will not depress the…
P
Printables
Wolfbox MF100 Air Duster - Gridfinity
A gridfinity bin to hold the MF100 air duster and all accessories!
P
Printables
Replacement Nozzle for use with a Wolfbox Air Blower
This is a replacement nozzle for use with a Wolfbox air blower. I did use supports under the outer edge of the partial rim at the base and also printed it using PETG
P
Printables
Wolfbox MF100 Gridfinity-holder
A Gridfinity 1x2 holer for Wolfbox MF100. I did use reference from other Author
P
Printables
Whistle Attachment for use with WolfBox Air Blower
I designed a replacement 3D printed nozzle for a friend who has a WolfBox air blower and came up with the idea that it would be easy to convert a nozzle into a whistle so I created this attachment. I used supports just for along the outer…
P
Printables
Wolfbox MF100 Honeycomb Holder + attachments
Simple Honeycomb holder for the Wolfbox MF100 and its its attachments.
P
Printables
Wolfbox Mirror Dash Cam Bracket Adapter
This is an adapter for a Wolfbox Mirror Dash Cam to work with an OEM bracket adapter for my 2020 Mazda CX-5. It lowers the mirror dash cam so the plugs at the top of the mirror don't interfere with the car's headliner. Originally designed…
P
Printables
Wolfbox G900 Pro Wire Cover
Slides in between the OEM mounting plate (required) and the display. Print with the front facing down so you can get a nice finish. (Will require support)
P
Printables
Honeycomb Storage Wall HSW Wolfbox Air Duster Storage
This provides a place to store your Wolfbox electric air duster, all the nozzles and the two brushes. There is a cutout with access to the USB port allowing charging.
P
Printables
custom attachments for WOLFBOX MF50 Electric Air Duster Jet Fan
Summary Customized attachments for the Wolfbox MF50 dust blower for individual areas of application (keyboard, notebook cooler, all types of filters, etc.) Print 0.16mm layer height 3 outer walls / perimeters 15% infill supports are…
P
Printables
Wolfbox MF100 Air Duster - Modified Lid Insert
This is a modified lid insert that removes some parts to make room for the strap that comes with the air duster.
P
Printables
Wolfbox MF100 Attachements Threadboard Mount
I used this with the Threadboard system so I can add it to my butcher blocks, close to my printers. I noticed when making it and testing, some attachments are bigger than others. This makes it difficult to get all the slots to fit…
P
Printables
Wolfbox MF100 Air Duster Threadboard Mount
You can use this on your own, or with the attachments included on this model page: https://www.printables.com/model/1357249-wolfbox-mf100-attachements-threadboard-mount. If you use this, READ BELOW: This mount requires a very specific…
P
Printables
Wolfbox MF50 snap fit case
Store your MF50 fan in a personalized case. INSERT piece needs to be printed in PETG for snap flexibility. All printed supportless, with an insert designed to press fit into the case (0.1mm clearance). Magnet holes are for 5x5, but STEP…
P
Printables
Wolfbox MF50 STEP
NOT an official step file, just my quick measurements. Used it to make my snap fit case: https://www.printables.com/model/1358459-wolfbox-mf50-snap-fit-case Basic nozzle included. As for other nozzles, I did not include any of the…
P
Printables
Wolfbox MF50 Skadis holder (using T-Clips)
Mount your Wolfbox MF50, inclusive accessories, on your Skadis pegboard! Using the T-Clip System by @LineArcLine. I printed it with 15% gyroid infill with the big flat face on the print bed. Support enabled for the horizontal parts. See…
P
Printables
WOLFBOX MF50 Storage
A quick easy to print holder for the WOLFBOX MF50. Sturdier then the plastic tray that comes with the electric duster.
P
Printables
Wolfbox MF100 Attachments Multiboard Mount
It's a push fit, not a snap. Quick and dirty remix, so some post processing may be necessary to get it to fit in the holes.
P
Printables
Wolfbox MF50 AirDuster Gridfinity
To fit into an l-boxx mini, I made a gridfinity bin that fits the Wolfbox MF50 air duster.
P
Printables
Skadis Wolfbox MF100 Attachment Holder
Print with the front side down, requires minimal supports.
P
Printables
Wall holster for WOLFBOX MF50 Air Duster
The WOLFBOX MF50 Compressed Air Duster is a best-selling (#1 on Amazon) fan-powered air duster. It's a great product; compact, rechargeable, and surprisingly powerful. This product gives you a super handy "holster" that lets you mount the…
P
Printables
Wolfbox MF50 Mount
Simple mount I designed to hold the MF50 under my desk. Can be mounted to hold vertically or horizontally and can also be mirrored in slicing software to reorient. Should be no problem to wall mount as well.
P
Printables
Wolfbox MF200 gridfinity storage
This Gridfinity storage solution is designed specifically for your MF200 Air Duster and its attachments. The 5×3 box holds the Air Duster itself. The 5×2 box is made for the nozzles and attachments. Both boxes are available in two…
P
Printables
Wolfbox MF200 Nozzle Lock Mechanism
This model gives you the basic locking mechanism for nozzles. Attachments snap in place with a small twist, so you can easily build and adapt your own custom designs.
P
Printables
Wolfbox MF200 Model
This model represents the Wolfbox MF200 Air Duster and is meant as a reference for creating your own holders, mounts, or accessories. It helps you save time by avoiding manual measurements simply align your design to the model. Two…
P
Printables
Wolfbox MF200 Stand
This stand is designed to let your MF200 stand upright in a stable and tidy way. It's especially useful if you want to keep the device ready to use on your desk or workbench without it rolling around or taking up unnecessary space.…
P
Printables
Wolfbox MF200 whistle
Probably the most useless, yet loudest attachment for your air duster: just snap it on and let the deafening whistle do its thing. It doesn’t clean better – but it sure gets louder.Probably the most useless, yet loudest attachment for…
P
Printables
Wolfbox MF200 Honeycomb Mount
This honeycomb holder is designed to keep your MF200 and its nozzles organized. The Air Duster holder provides a stable slot to store the device upright. The nozzle holder features five slots where the attachments can be placed side by…
P
Printables
Wolfbox MegaFlow MF200 STEP file (not official)
Fairly accurate not official model made from my own measurements and testing of the real model. All components included: Main body front / back attachment rings grip pads left and right power / fan control / battery release buttons…
P
Printables
Wolfbox MF50 Multiboard Holder
Made a holder for my MF50 to mount it on Multiboard. Recommend using 2 multiconnect connectors, but 1 could work too.
P
Printables
Wolfbox G900 Tripro Bracket Adapter 1/4"-20 to Ball Mount
This is a simple model to allow a ball mount adapter to be attached to the OEM mounting bracket of a Wolfbox G900 dashcam. My camera is a G900 Tripro, but this adapter will work for anything that has a 30mm x 30mm hole pattern on the…
P
Printables
Wolfbox MF200 - Wolf Box Hard Case
Do you desire powerful airflow beyond your wildest dreams? Well you will need a way to contain all that raw energy. What better than a hard case - that goes just as hard? The brand new Wolfbox MF200 has arrived, a powerful apex successor…
P
Printables
Wolfbox rear camera mount for Super Duty 2017+
This mount just slips up behind the headliner. It allows you to mount a wolfbox rear camera inside the rear window. The short mount is used on either side of the sliding rear window. The long mount can be used anywhere, including over the…
P
Printables
Wolfbox to GFC Mount
This is a custom 3D-printed mount for attaching the rear Wolfbox camera to the back of my GFC. It’s printed in Protopasta HTPLA Carbon Fiber with 4 walls and 10% infill. The camera is attached with 3M automotive double-sided tape. The…
P
Printables
Wolfbox reverse flow nozzle
Nozzle for Wolfbox MF100 for sucking air instead of blowing it. Tip of the nozzle fits most shisha/hookah hoses. Usable for starting the shishas or pulling other fumes out. You will need some rubber bands to attach it to Wolfbox! Tested…
P
Printables
Stand for Wolfbox MF100
Print with supports. Adjust XY Size Compensation/Horizontal Expansion for a looser fit.
P
Printables
Wolfbox MF50 + Nozzle - Gridfinity 3x4x4
Just a case to store your MF50 with its acessories
P
Printables
Wolfbox MF50 storage case with lid (gridfinity)
Simple case to store the Wolfbox MF50 blower, the lid is optional, you can put whatever gridfinity box on top instead. The simple pull over clamp might be adjusted in size to work with the material shrinkage you have, just adjust in the…
P
Printables
Multiboard MF50 Wolfbox Nozzle Holder (Tool + 4 Nozzles)
This project includes two Multiboard attachments designed for the MF50 Wolfbox tool : A holder for the MF50 Wolfbox device itself A separate holder for up to 4 nozzles
P
Printables
Wolfbox MF50 Case Remix
Quick remix to make unit easier to remove, no lettering, and 6x3mm magnets.
P
Printables
Chamber Coolers and adapter for use with WolfBox MF100 Electric Air Duster
Acquired a WolfBox MF100 extremely powerful air duster based on Project Farm's Youtube review and was not disappointed. Luckily when not in TURBO mode it will stay on indefinitely in its low and Medium settings which is still alot of air.…
P
Printables
WolfBox AirDuster Long Nozzles
I frequently use air dusters to clean drum filters remove dust from inside PC or many other cleaning tasks in narrow corners. I liked the compact design of the WolfBox models (especially the MF50 is very handy and lightweight), but…
P
Printables
GOEWS Wolfbox MF100 Holder
Remix of @ripley’s Honeycomb Storage Wall – Wolfbox Air Duster Storage to fit the GOEWS mounting system. This GOEWS Wolfbox MF100 Holder keeps the same form-fitting cradle for the Wolfbox MF100 air duster but swaps in 2x vertical GOEWS…
P
Printables
Wolfbox MF200 +8% optimized nozzle
The one in the photo is the first version of nozzle where I had to add some glue on the mating surface to build up thickness -- otherwise it wasn't locking good enough. Since then I increased thickness of locking tabs from 1.5 mm to 1.75…
P
Printables
Wolfbox MF50 Organizer
Print it as you prefer, I just recommend a brim as the design may be prone to warping. Higher infill will help in rollover accidents. I printed mine in PETG 60% infill.
P
Printables
Wolfbox MF50 Skadis nozzle holder
Used for wolfbox mf50 to hold nozzles on skadis board Print with supports! I used 100% infill, 0.2mm, with grid style supports, takes about 2 hour on mk3s
P
Printables
Wolfbox MF50 Stand
I created a stand for my Wolfbox MF50 + accessory nozzles to sit on my workbench for easy access. It includes an integrated channel in the bottom which provides airflow to the vent on the bottom of the unit. The charger port is uncovered…
P
Printables
Wolfbox Camera Shroud
Covers the camera for a Woldbox digital rear view camera. Printed in PETG or ASA, with the gasket in flex or TPU.
P
Printables
Nozzle for Wolfbox MF100 blower to train whistle
Just in case you're tired of printing useful things, here's something slightly pointless. A nozzle for the Wolfbox MF100 blower (as seen on Project Farm youtube channel; video1 and video2 - and others!) that replaces the mouthpiece for…
P
Printables
Magnetic Holder for Wolfbox MF100
Currently the slots in the back are sized for some random HDD magnets that I had around. The step file is included, so feel free to add wall mounting holes, a hook or whatever you need :)
P
Printables
Rugged box for the WOLFBOX MF50 Electric Air Duster
printed with bambu standard petg presets 30mm m3 bolts were used for the latch and the hinge
P
Printables
Gridfinity Tray for Wolfbox MF50 Air Duster
Flat design so it fits in my toolbox drawer. Prints well in PLA with low infill.
P
Printables
Air Duster Holder – Wolfbox Air Duster Stand – Designed for Honeycomb Wall Storage system
Shelf to store the Wolfbox air duster on the Honeycomb storage wall.
P
Printables
Wolfbox G900 Pro Rear View Cam Cover
Wanted to mount my rear view camara for my wolf box dashcam on the outside of my car to replace my rear view mirror as it gives me a far better field of view but didn't want to leave it completely exposed, found a few designs but they…
P
Printables
Ineos Grenadier Wolfbox Bracket
This is a custom mount designed for installing a Wolfbox in the Ineos Grenadier. When mounting the Wolfbox on the original Rear-view mirror, the cables have insufficient space and the overall setup appears bulky. To solve this issue, this…
P
Printables
Wolfbox MegaFlow 50 (MF50) Wall Mount Hanger
Mount to the wall with countersunk screws. Done!
P
Printables
Wolfbox MegaFlow 50 (MF50) Peglock Mount Hanger
Print the mounts. Print 3x universal attachment. Voila.
P
Printables
Bike chain dryer for Wolfbox Megaflow-100 MF-100
Replacement nozzle for the Wolfbox MF-100 that dries a bike chain quickly. Fits 11 or 12 speed chains. Might be tight on lower speed chains. To use: install it on your blower power on the blower put the nozzle on the chain so that the…
P
Printables
Wolfbox MF200 female socket
I expect this should print pretty well with any filament with default settings. no supports or brim required. I've printed this in generic PLA and PETG and it always has a nice friction fit.
P
Printables
Wolfbox MF200 Vacuum
Caution, this can obviously break your tool if you attempt to vacuum objects with it. I made this mostly for laughs, but it could be useful to suck air out of bags before sealing, or maybe vacuuming if someone were able to come up with a…
P
Printables
5th Gen 4Runner WolfBox Camera Mount
This mount is for a Wolfbox upgraded rear view camera ( https://www.amazon.com/dp/B0B1LLMCS9 and https://www.amazon.com/dp/B09KRM9QQ5 ). It mounts under the 3rd brake light on a 5th Gen 4Runner (2018). I would suggest using ABS. I also…
P
Printables
Wolfbox camera bracket for an RV
This bracket is designed to adapt the Wolfbox 900 Pro camera to the back of an RV. It is for an Entegra Condor, but may fit other RVs.
P
Printables
Suction Adapter for Wolfbox MF50 Mini-Blower
Designed to suck only clean air. For example, from the filament package. Don't try vacuuming dust... Designed to have a firm friction fit. The firmness will depend on the printer and the filament. For the best results, cut the model and…
P
Printables
Halter für Megaflow200 von Wolfbox
Für den Megaflow200 von Wolfbox benötigte ich eine Möglichkeit das Gebläse und die verschiedenen Düsen leicht zugänglich aufzubewahren. Die entworfene Befestigung kann angeschraubt oder an einer Skadisplatte befestigt werden. Die…