Wolfbox MF100 Attachements Threadboard Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use with the Threadboard system to mount the blower and the attachments.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I used this with the Threadboard system so I can add it to my butcher blocks, close to my printers.
I noticed when making it and testing, some attachments are bigger than others. This makes it difficult to get all the slots to fit perfect, so you mileage my vary as far as the “feel” of how they go into the slot.
In the photos I included, it shows a picture of the mount for the Air Duster itself, but I don't like how it fits. It requires a very specific bolt from from the Threadboards page, and will only work if the threads line up good enough to allow the bolt to face vertical, ( as shown in the photos ). It has it's own model page here: https://www.printables.com/model/1357252-wolfbox-mf100-air-duster-threadboard-mount
The Threadboard bolt that was used is on this page: https://www.threadboards.com/user_uploads.php
Name of the bolt: HD12xTHRD18 Super Strength
IF YOU DECIDE TO PRINT AND TRY TO MOUNT AS SHOWN IN MY PHOTO, BE CAUTIOUS, IT MAY NOT WORK FOR YOU.