MF50 Wolfbox Filament Sucker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
adapter for the Wolfbox MF50 so you can easily suck air from filament bags
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Thanks to @PrintingPerspective for the great original model.
by @CriptasticHacker
https://cripsrise.neocities.org/
Please leave a ♥ if this helps you :)
The MF50 is perfect for suction adapters given its hex shaped plastic body.
@PrintingPerspective already was using this for filament bags, but I wanted something that didnt just suck air from the zipper portion, so I updated it with this design.
I also added a notched opening in the hex plastic for easier access to the USB port, since I use a somewhat bulky magnetic USB charging adapter.
NOTE: Only tap the air gun, and be sure not to overdrive it. I imagine it's pretty easy to blow out the motor if being careless. I am not responsible for any damage to your MF50 by using this print.
PLA - standard settings (Overture PLA used cause its cheap)
0.3mm height
40% infill (60% is probably better though)
3 walls (5 is probably better though)
no supports
Printed on (rooted with KAMP and Fluidd) Creality K1C
Print time = ~39min