MF50 Wolfbox Filament Sucker
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
adapter for the Wolfbox MF50 so you can easily suck air from filament bags
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 101
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Thanks to @PrintingPerspective for the great original model.
by @CriptasticHacker
https://cripsrise.neocities.org/
Please leave a ♥ if this helps you :)
The MF50 is perfect for suction adapters given its hex shaped plastic body.
@PrintingPerspective already was using this for filament bags, but I wanted something that didnt just suck air from the zipper portion, so I updated it with this design.
I also added a notched opening in the hex plastic for easier access to the USB port, since I use a somewhat bulky magnetic USB charging adapter.
NOTE: Only tap the air gun, and be sure not to overdrive it. I imagine it's pretty easy to blow out the motor if being careless. I am not responsible for any damage to your MF50 by using this print.
PLA - standard settings (Overture PLA used cause its cheap)
0.3mm height
40% infill (60% is probably better though)
3 walls (5 is probably better though)
no supports
Printed on (rooted with KAMP and Fluidd) Creality K1C
Print time = ~39min