Wolfbox MF50 French Cleat Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
French Cleat style holder for the Wolfbox MF50 duster (https://www.amazon.com/dp/B0DSW7R4VN).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
French Cleat style holder for the Wolfbox MF50 duster (https://www.amazon.com/dp/B0DSW7R4VN). I didn't like other holders I saw out there for this unit. I wanted something compatible with wall mounting and I wanted the attachments to sit nice and deep in their holders.
STP included to better remix-ability, I modeled on OnShape so you can also make a copy and tweak the native model (https://cad.onshape.com/documents/c812ab36603a032f3bcd6ec9/w/df74dd9d8b4ce3abed826af4/e/df0413d6ea4eba32f4c1d7de?renderMode=0&uiState=6a4988445c941f9a5597d4bd).
Feel free to adapt it to other storage systems, I may do HSW and French-finity at some point. But for now I just wanted the french cleat so that's all I have right now.
Print orientation:
I recommend the print orientation as shows in the photo as it'll put the layers in the strongest orientation, especially for the french cleat. You may be able to let the bridges be without supports, but I printed it once and did use supports. If you try it without supports please post your make!
I printed in PETG, but I think PLA would also be fine. The actual unit is the only heavy part and that is right up next to the mount, so I don't think there's much risk of it creeping over time and failing. YMMV.