Wolfbox MF100 Air Duster Threadboard Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use this to mount your air duster to the threadboard system.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
You can use this on your own, or with the attachments included on this model page: https://www.printables.com/model/1357249-wolfbox-mf100-attachements-threadboard-mount. If you use this, READ BELOW:
This mount requires a very specific bolt from from the Threadboards page if you want to use it with the accessory attachments as shown in the photos. It will only work if the threads line up good enough to allow the bolt to face vertical, ( as shown in the photos ). It has it's own model page here: https://www.printables.com/model/1357252-wolfbox-mf100-air-duster-threadboard-mount
The Threadboard bolt that was used: https://www.threadboards.com/user_uploads.php
HD12xTHRD18 Super Strength
Supports are required for the bolt holes. Preferably, tree supports. Happy Printing!