Wolfbox G900 Tripro Bracket Adapter 1/4"-20 to Ball Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mounting plate for ball mounts
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 879
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple model to allow a ball mount adapter to be attached to the OEM mounting bracket of a Wolfbox G900 dashcam. My camera is a G900 Tripro, but this adapter will work for anything that has a 30mm x 30mm hole pattern on the bracket. This does require you to own the OEM bracket (there are some models out there for the G930 if you want to save $20).
The center hole is sized for a ¼"-20 bolt. The four outer holes fit an M3 bolt and I used ones 8mm in length.
You can either use a ball adapter with a female hole or with a male bolt with a ¼" bolt width. If using a male adapter, then just make sure it's short enough to not hit the back of the camera. If it does, maybe scale the model on the z-axis to make it taller or offset it with washers.
I used the female ¼"-20 to 1" ball adapter from Ram Mounts and I think I would recommend using a male adapter instead. The weight of the camera can loosen the bolt, so I had to apply some thread-locker to prevent that. With the male adapter you could use a nylon lock nut to prevent it from coming loose (or many other options).