Wolfbox front camera mount for Mercedes-Benz Sprinter Van VS30 (W907)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This adapter allows to attach a camera to the center of the Sprinter front grill pointing downward.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 15
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Printed in ABS @0.3mm layer height, 4 wall loops, 25% infill.
Held in place by two screws in the front and two zip ties in the back.
The camera is stuck in place by the double sided tape provided by Wolfbox
See screenshot for printing orientation (the supports are not strictly necessary, I added them for safety.
I ended up using the 40degree angled version, that at the closest shows 28 inches (71cm) in front of the bumper. Once the camera is glued, it is tight to put it in place, but it works with a little bit of force. Remove the three top screw of the grill in order to install the zip ties. Also use a very low profile bit holder to tighten the screws. You may need to enlarge the holes depending on the screw type you use. Alternatively, very good two-sided tape or glue could be used.
I also provided a 30degree version if you want the camera a bit straighter.