Atoto USB one-port insert for Fiat Ducato/Citroen Sprinter ligher hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I bought an Atoto S8 car stereo for my Ducato camper and I needed a place to install one of the two USB ports.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 168
- Wydruki
- 1
- Wyświetlenia
- 1203
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I bought an Atoto S8 car stereo for my Ducato camper and I needed a place to install one of the two USB ports. In Atoto box there is a two-ports USB cable included but nothing to hold it in-place. I used one USB port for DAB adapter connection (hidden behind the central unit) but I wanted to use the other port for mobile phone connection (mainly for Android Auto).
I designed this component to replace one (of the two) lighter with this USB port ready to connect my phone.
Cable can be routed inside insert and USB port pushed inside holes.
It does not need glue as the shape fit perfectly to hold connector in place.
You can disassemble Ducato dashboard with a single screw and a plastic tool.
Please share your photo.
Bye
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
Yes
Infill:
20%
Filament:
FiloAlfa Alfa+ PLA
Black Metal
Notes:
These are the settings I used, different settings may work too.
Support are needed only if you print facedown for better surface definition.
Category: Automotive