Mercedes Sprinter Van (VS30) Factory Interior Light Adapters and Housings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Repurpose your Sprinter's factory LED interior lighting. Either remix the adapter plate or try the screw in housings.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 157
- Wydruki
- 0
- Wyświetlenia
- 1492
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to keep my factor interior lighting from my Mercedes Sprinter Van as I build it out as a camper. I created an adapter to remix into various housings around the vehicle and thought I'd share for others to build their own housings or download one of the creations I have made.
Note: The light should fit through the tapered side so the backside is flat and the front has the inset. Make sure you have this orientation correctly or the light will be loose. This is by deign as the light has a catch that I deigned to keep the light snapped in place but removable.
Adapters and Housing Files
- Adapter Plate: A very basic shape to remix into your own housings or needs. Note the face orientation makes a difference on how snug the light snaps into place. The light should fit through the taper so the backside is flat and the front has the inset.
- Basic Housing: A simple screw in place housing with air vents for any heat from the light and access for the plug on one side.
- 15 Series / 8020 Flat Plate Adapter: Easy to bolt to aluminum extrusions which work well for inside cabenetry or other designs when using tnutz, 8020 or other slide nut type framing.