1 / 3
Sunny Health Asuna 6100 Sprinter Hub for Speed Sensor — zdjęcie 1
1 / 3

Sunny Health Asuna 6100 Sprinter Hub for Speed Sensor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Used to mount 30mm wireless speed sensors to exercise bike. The flywheel didn't have a hub to mount the sensor to, so…

Ocena
0 / 5
Polubienia
0
Pobrania
12
Wydruki
0
Wyświetlenia
96
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Used to mount 30mm wireless speed sensors to exercise bike. The flywheel didn't have a hub to mount the sensor to, so I designed this Thing.

Meant for a Sunny Heath Asuna Sprinter 6100. May work for others.

Print Settings

Printer:

Rafts:

No

Supports:

Yes

Resolution:

200

Infill:

45

Filament:

- ABS


Notes:

The 3 holes are slightly tight, which works out perfect to snap on to the 3 cap screws. There is a recess for a 12mm x 3mm magnet to attach to center screw. Depths is meant for 2 magnets stacked. I endeded up not needing it since the part was tight enough around the 3 outer scews.

Category: Sport & Outdoors

Tagi