Sunny Health Asuna 6100 Sprinter Hub for Speed Sensor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Used to mount 30mm wireless speed sensors to exercise bike. The flywheel didn't have a hub to mount the sensor to, so…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 96
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Used to mount 30mm wireless speed sensors to exercise bike. The flywheel didn't have a hub to mount the sensor to, so I designed this Thing.
Meant for a Sunny Heath Asuna Sprinter 6100. May work for others.
Print Settings
Printer:
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
45
Filament:
- ABS
Notes:
The 3 holes are slightly tight, which works out perfect to snap on to the 3 cap screws. There is a recess for a 12mm x 3mm magnet to attach to center screw. Depths is meant for 2 magnets stacked. I endeded up not needing it since the part was tight enough around the 3 outer scews.
Category: Sport & Outdoors