Maxxair Maxxfan Plus adapter for W906 sprinter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed to adapt to fit the ribs on a W906 sprinter
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 164
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Couldn't find a retail option to mount a new fan and everything was made for the Maxxfan Deluxe which is a different size. Couldn't use Butyl tape because of the rough texture of the raptor paint (I don't think so anyway!).
This model is split into 6 different parts, printed in solid ASA (needed 2 x 1kg spools) and sanded to give it a key. I have glued them together with Sikaflex 522 and used Plastic Welding Staples to add rigidity. First was pre-drilled and sikaflexed to the adapter and then the roof of the van a couple of weeks later.
Numbered like so:
Front of van | ||
|---|---|---|
3 | 4 | 5 |
2 | 6 | |
1 | ||
Rear of van | ||
Numbers face up, arrows face the front of the van / direction of travel.
Wish me luck when it rains!
UPDATE: 15/08 no leaks found yet even after some horrible rain! :)