Maxxair Maxxfan Plus adapter for W906 sprinter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Needed to adapt to fit the ribs on a W906 sprinter
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 0
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Couldn't find a retail option to mount a new fan and everything was made for the Maxxfan Deluxe which is a different size. Couldn't use Butyl tape because of the rough texture of the raptor paint (I don't think so anyway!).
This model is split into 6 different parts, printed in solid ASA (needed 2 x 1kg spools) and sanded to give it a key. I have glued them together with Sikaflex 522 and used Plastic Welding Staples to add rigidity. First was pre-drilled and sikaflexed to the adapter and then the roof of the van a couple of weeks later.
Numbered like so:
Front of van | ||
|---|---|---|
3 | 4 | 5 |
2 | 6 | |
1 | ||
Rear of van | ||
Numbers face up, arrows face the front of the van / direction of travel.
Wish me luck when it rains!
UPDATE: 15/08 no leaks found yet even after some horrible rain! :)