NetAlly LinkSprinter LS300 hard case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D printable case for the NetAlly LinkSprinter LS300
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 287
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
A hard case for the NetAlly LinkSprinter LS300 Pocket Network Tester. I bought mine used so it didn't come with the soft protective cover. I hope to improve on the original soft cover by including a space to store the two AA batteries outside of the LinkSprinter which will eliminate the risk of them leaking inside and corroding the electronics.
Assembled case dimensions: x: 58mm y: 160mm z: 38mm
The photos show the actual printed parts in eSUN PLA+ (Peak Green):
0.4mm nozzle
0.2mm layer height
3 Perimeters
20% Inflill
Supports: No.
Parts required for assembly:
Print 1x Base
Print 1x Top
Print 1x Clip
3x 5mm x 50mm bolts and nuts - 2x for the hinge and 2x for the clip. I recommend locking nuts or thread locking glue so they don't loosen when hinging the case open and closed.