NetAlly LinkSprinter LS300 hard case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D printable case for the NetAlly LinkSprinter LS300
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 64
- Makes
- 0
- Views
- 287
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
A hard case for the NetAlly LinkSprinter LS300 Pocket Network Tester. I bought mine used so it didn't come with the soft protective cover. I hope to improve on the original soft cover by including a space to store the two AA batteries outside of the LinkSprinter which will eliminate the risk of them leaking inside and corroding the electronics.
Assembled case dimensions: x: 58mm y: 160mm z: 38mm
The photos show the actual printed parts in eSUN PLA+ (Peak Green):
0.4mm nozzle
0.2mm layer height
3 Perimeters
20% Inflill
Supports: No.
Parts required for assembly:
Print 1x Base
Print 1x Top
Print 1x Clip
3x 5mm x 50mm bolts and nuts - 2x for the hinge and 2x for the clip. I recommend locking nuts or thread locking glue so they don't loosen when hinging the case open and closed.