1 / 2
Adapter from Nasa BM-1 to Victron BMV-7xx — zdjęcie 1
1 / 2

Adapter from Nasa BM-1 to Victron BMV-7xx

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter for Victron BMV-7xx which covers the hole from an old Nasa BM-1 / BM-2 series battery monitor.

Ocena
0 / 5
Polubienia
8
Pobrania
41
Wydruki
0
Wyświetlenia
336
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

When upgrading from AGM to LiFePO4 the old Nasa BM-1 battery monitor needed to be changed. The Victron BMV-7xx seemed like a good choice, but it is much smaller than the old battery monitor, so I created this adapter.

The model has been provisioned for 4 M3 screws to secure it. The length depends on the thickness of the material it is being installed on. They may even be omitted.

Tagi