Victron GX Touch 50 Wall Mount Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom-designed mounting bracket for the Victron GX Touch 50 display panel. Clean and sturdy solution.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Victron GX Touch 50 Custom Wall / Surface Mount Bracket
Custom-designed mounting bracket for the Victron GX Touch 50 display panel. Created as a clean and sturdy solution to mount your display onto walls, cabinets, or control panels in RV, marine, or off-grid solar setups.
The mount securely holds the screen in place while allowing clean cable routing and easy access to the panel.
Technical Specifications
Compatible Device: Victron Energy GX Touch 50
Diagonal Mounting Hole Distance (Center-to-Center): 130.116 mm
Recommended Materials: PETG (recommended for heat and UV resistance in camper vans or technical enclosures) or PLA
Cable Management: Built-in pass-through for neat wiring setup
Hardware Integration: Features built-in recessed slots designed to hold M6 or M7 nuts for secure screen mounting
Recommended Print Settings
Material: PETG (tested) or PLA
Layer Height: 0.20 mm
Perimeters / Walls: Standard as per the used slicer; you can use 3 – 4 (ensures strength around mounting screw holes)
Infill: 10% – 15% (Gyroid or Grid)
Supports: Not required if printed flat on the build plate
Build Plate: Textured PEI sheet (ideal for PETG)