Lüfterhalterung für Victron Solarladeregler - Fan mount for Victron solar charge controller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lüfterhalterung (120mm) für Victron Solarladeregler Fan mount for Victron solar charge controller
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 1672
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Da der Victron Solarladeregler bei 40 Grad seine Leistung drosselt wollte ich ihn aktiv und leise mit einem 120mm Lüfter kühlen. Die Lüfterhalterung lässt sich einfach in die zwei Verschraubpunkte schrauben die für das Display vorgesehen sind. Das ganze habe ich mit PLA gedruckt. Aufgrund der Größeneinschränkung (220x220mm) meines Druckers ragt der Lüfter über das Gehäuse, die Kühlung funktioniert allerdings auch so sehr gut.
As the Victron solar charge controller reduces its performance at 40 degrees Celsius, I wanted to cool it actively and quietly with a 120mm fan. The fan holder can simply be screwed into the two screw points provided for the display. I printed the whole thing with PLA. Due to the size restriction (220x220mm) of my printer, the fan protrudes over the housing, but the cooling works very well as it is
Druckereinstellung in Cura:
Layer Height: 0,2mm
Wall Line Count: 3
Z Seam Alignment: Sharpest Corner
Seam Corner Preference: Hide Seam
Infill: 15%
Infill Pattern: Cubic Subdivision