Victron Energy 500A shunt cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple cover to protect the 10mm hex bolt heads from inadvertent contact, resulting in a short circuit.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 347
- Wydruki
- 1
- Wyświetlenia
- 2181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
This Victron Energy 500A shunt is the newer (IP65 version, released 2023). I think the older non-IP65 version has the same bolt hole spacing, so this cover should work on that one too. This is a simple cover to protect the 10mm hex bolt heads. I found (after printing this one), that there are a couple other designs on here, and all are for the older version, and most are full covers (or larger more protective ones). Other common solutions I found on the Internet are clear lexan/plexiglass covers too. This one is printed in PLA, because that's what I had loaded at the time, but I would recommend ABS or ASA, something with a little more material strength.