1 / 4
Victron Energy 500A shunt cover — image 1
1 / 4

Victron Energy 500A shunt cover

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a simple cover to protect the 10mm hex bolt heads from inadvertent contact, resulting in a short circuit.

Rating
0 / 5
Likes
30
Downloads
347
Makes
1
Views
2,172
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Public Domain

This Victron Energy 500A shunt is the newer (IP65 version, released 2023). I think the older non-IP65 version has the same bolt hole spacing, so this cover should work on that one too. This is a simple cover to protect the 10mm hex bolt heads. I found (after printing this one), that there are a couple other designs on here, and all are for the older version, and most are full covers (or larger more protective ones). Other common solutions I found on the Internet are clear lexan/plexiglass covers too. This one is printed in PLA, because that's what I had loaded at the time, but I would recommend ABS or ASA, something with a little more material strength.