1 / 2
Busbar cap Victron Lynx Distributor and Power-In
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cover to shield the exposed busbars at the end of the Victron Lynx Busbar or Power-IN.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Cover to be used in addition to the silicon covers provided by Victron. I was looking for a more finished look compared to the ends of the busbar just sticking out.
The cover can be screwed to the backboard with a 4x30mm screw.
