Victron2MQTT Case V2 (Hutschiene + thread inserts)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-printable enclosure designed to house a Victron2MQTT PCB and a Wemos D1 on a Hutschiene
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 254
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 3D-printable enclosure designed to house a Victron2MQTT PCB and a Wemos D1. The case consists of two parts: a bottom housing and a snap-on top cover. The design includes ventilation slots for heat dissipation and mounting flanges for secure installation.
Ypu can mount it on a Hutschiene. It needs M2 thread inserts for mounting the PCB
I used these press insert nuts: https://amzn.to/429OTcX
The case features a cutout for a USB-C connector and an opening for a 4-pin connector, ensuring easy access for wiring. Printed in PETG or ABS, this enclosure provides durability and protection for your electronics while maintaining a compact form factor.
Info: Its ment to be for WEMOS D1 Mini with USB C on the top. Wemos D1 has pin headers soldered to and the femal headers are soldered to the PCB to easily plug the wemos in!
https://github.com/softwarecrash/Victron2MQTT