Victron Battery Switch 275A Separator Bottom Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a detailed model of the Victron Battery Switch 275A + a custom bottom plate with separator wall.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 307
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a detailed model of the Victron Battery Switch 275A 60V switch. I measured a physical switch with calipers and modeled the switch in CAD. The .step file contains the whole switch with original bottom plate, as well as a 3d printable custom bottom plate, that fits perfectly in the existing switch and adds a separation wall between the two electrical terminals / bolts.
My buddy Josh printed it for me and it came out perfect. He used these settings:
- Filament: Generic PLA+
- Layer Height: 0.2mm
- Seam Position: Aligned
- Precise Wall: On
- Wall loops: 6
- Top shell layers: 5
- Bottom shell layers: 3
- Surface pattern: Concentric
- Infill density: 25%
- Sparse infill pattern: Cross Hatch
- Internal solid infill pattern: Monotonic
- Supports: None