Victron Battery Switch 275A Separator Bottom Plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a detailed model of the Victron Battery Switch 275A + a custom bottom plate with separator wall.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 58
- Makes
- 0
- Views
- 309
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a detailed model of the Victron Battery Switch 275A 60V switch. I measured a physical switch with calipers and modeled the switch in CAD. The .step file contains the whole switch with original bottom plate, as well as a 3d printable custom bottom plate, that fits perfectly in the existing switch and adds a separation wall between the two electrical terminals / bolts.
My buddy Josh printed it for me and it came out perfect. He used these settings:
- Filament: Generic PLA+
- Layer Height: 0.2mm
- Seam Position: Aligned
- Precise Wall: On
- Wall loops: 6
- Top shell layers: 5
- Bottom shell layers: 3
- Surface pattern: Concentric
- Infill density: 25%
- Sparse infill pattern: Cross Hatch
- Internal solid infill pattern: Monotonic
- Supports: None