1 / 1
Spacer to match Daiertek 300A bus bars to Victron 500a smart shunt
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer to height match 300A bus bars to the Victron smart shunt. I made these so I could use copper flat connections.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Simple spacer to go underneath these reasonable bus bars.
Designed for two purposes - allow wiring to pass beneath the bus bar and to height match to the smart shut so that copper flat can be used for high amp interconnects.
Pass through is good for .5" wire.
