P
PrintablesFishtank555
BR class 08 shunter
110% needs support and increased bed adhesion. As of May 11th, 2026, it is not printer tested. needs chassis and body glued together definitely. higher infill reccomended
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
Wyniki wyszukiwania: shunt
Liczymy pasujące modele…
P
Printables
Victron Energy BMV 500 Shunt Cover
Protective cover for the Victron Energy BMV 500A shunt (e.g. as used in the BMV712). I have provided covers for cable side exit (as used in my own setup) as well as rear and front exit alternatives. Print Settings Rafts: Not needed…
P
Printables
Mounting Block for Victron SmartShunt
This block is a back plate for mounting a Victron Smartshunt on an enclosure. The block is placed on the outer surface of the enclosure to provides both security and stability. Drill 2 holes 100mm apart and place the shunt inside. The…
P
Printables
100A 75mv Shunt holder
Shunt holder block and Shunt model typical shunt that comes with the panel mount Amp and Voltage meters and locks in M8 bolt . Updates : Have also included the model of the 100A shunt . V3's Length on the v2 models was a bit short for…
P
Printables
(LP/VP) shunt adjuster tool
This is a model of a Codman Certas brand (LP/VP) shunt adjuster tool, and it is designed for doll toys. The entire toy can be printed on a single colour printer. All parts are printed as originated in STL's. the Body Top needs to be…
P
Printables
Victron SmartShunt 1000A cover
Some protection for your SmartShunt from accidental shorting. Print in PETG or PC.
P
Printables
Victron Energy BMV 500 Shunt Cover
Protective cover for the Victron Energy BMV 500A shunt (e.g. as used in the BMV712). I have provided covers for cable side exit (as used in my own setup) as well as rear and front exit alternatives. Print Settings Rafts: Not needed…
P
Printables
Kepco BOP current shunt
This box is designed for analog measurement of the current flowing from your Kepco BOP power source. By incorporating a shunt resistor (1 Ohm or 0.1 Ohm are recommended options), you can measure the voltage across it to determine the…
P
Printables
ČD Class 700 shunting locomotive (piggy)
Hi! This is my model of ČD class 700 locomotive, also know as piggy (prasátko in czech) for 3d print. Tested on Prusa mini+ Scale:1:63 En Info and HIstory: The ČD Class 700 (Before ČSD Class T 211.0) is a two-axle diesel–mechanical…
P
Printables
diybms shunt PCB, mounting bracket
This mounting bracket mounts the diybms shunt PCB to a 1000A Victron shunt. I use it in conjunction with a Lynx PowerIn T-Class and a Lynx Distributer M8 (while a M10 would be better suited, as the Victron shunt is M10…) i attached also…
P
Printables
Victron 500A SmartShunt, Straight-through Cover
Simple shunt cover for the open-frame Victron 500A Smart-shunt in a straight-through cable configuration. Parametric FreeCAD file included for customization.
P
Printables
Victron Smartshunt 300A wall mount
A simpel bracket to mount the Victron Smartshunt 300A to a wall. I don't know if the 500A version will fit.
P
Printables
Shunter Locomotive - Brio Compatible
This little shunter will happily pull around your Brio and Ikea trains. Parts List: 4x M2 cap head screws 6-12mm length 4x M2 washers 2x 10x4x3mm ring magnets 2x 10mm diameter metal push pins A touch of CA glue Printing Instructions:…
P
Printables
Blende für Schneider MCB mit Shunttrip
Ich habe in meinen EEL Battery Boxen V4 den unbrauchbaren Chcyzo MCB durch einen Schneider Electric Leitungsschutzschalter Typ C120H mit 125A (Bestellnummer A9N18404, ca. 70€) ersetzt. Der passt statt dem Chcyzo direkt rein. In meinem…
P
Printables
Victron Lynx compatible Smart Shunt 500A and switch housing and LOGO
Use a strong filament for the back plate, as PC, PETG, etc For the blue face, you can use any filament. Use supports! A list of parts HERE The closest colour match I can find to the original Victron colour seems to be (I did not have that…
P
Printables
Victron Lynx SmartShunt
Victron Lynx is a nice & tidy system, but I feel that it is money-oriented Why? - Lynx PowerIn can be easily transformed into a Lynx Distributor (with no LEDs) - Lynx Distributor takes power from the Lynx Shunt. - Lynx Distributor has…
P
Printables
iBMS & Smart Shunt connectionCase
Box for iBMS and Smart Shunt connection. All components are in one box, easy to install on the wall using double-sided a
P
Printables
Spacer to match Daiertek 300A bus bars to Victron 500a smart shunt
Simple spacer to go underneath these reasonable bus bars. Designed for two purposes - allow wiring to pass beneath the bus bar and to height match to the smart shut so that copper flat can be used for high amp interconnects. Pass through…
P
Printables
Forced air cooled low-cost shunt
A forced air cooled shunt made out of 100W resistors. An optional USB-C trigger board with a 3A buck converter can be used for power supply. So you have all your "good" power supply outputs for your circuits. All typical AliExpress stuff.…
P
Printables
Mounting Block for Victron SmartShunt
This block is a back plate for mounting a Victron Smartshunt on an enclosure. The block is placed on the outer surface of the enclosure to provides both security and stability. Drill 2 holes 100mm apart and place the shunt inside. The…
P
Printables
100A 75mv Shunt holder
Shunt holder block and Shunt model typical shunt that comes with the panel mount Amp and Voltage meters and locks in M8 bolt . Updates : Have also included the model of the 100A shunt . V3's Length on the v2 models was a bit short for…
P
Printables
(LP/VP) shunt adjuster tool
This is a model of a Codman Certas brand (LP/VP) shunt adjuster tool, and it is designed for doll toys. The entire toy can be printed on a single colour printer. All parts are printed as originated in STL's. the Body Top needs to be…
P
Printables
SV08 Top Hat Meter and Shunt
Remixed John SC's and Jarhead's panels to better support what I wanted. I changed up the switch panel to include a power meter (I used this power meter in my build, others may work too.) and mount a shunt behind the Sovol touch screen, as…
P
Printables
Victron energy Smart Shunt 500A + Victron Battery Switch 275A + Precharge button and led
Moved things around and added a pre-charge button and led to it. Had to get creative with the busbars to make it fit, not the prettiest busbars. button: https://s.click.aliexpress.com/e/_c40G5HgV light:…
P
Printables
starfinder female mechanic human or lashuntas
I designed these mechanics to be human or lashunta when i started modeling for thingiverse one thing that really helped me was the community and one of those prolific artists is dutchmogul he provided free sculptris "dummies" which really…
P
Printables
starfinder Female bounty hunter human or Lashunta
I designed these with and with out antenna so they can be human or lashunta when i started modeling for thingiverse one thing that really helped me was the community and one of those prolific artists is dutchmogul he provided free…
P
Printables
shunt enclosure
I required an enclosure for a 50A shunt to prevent people touching it. To make it more interesting, I also added a DIN-rail mount because... DIN rails. You'll need some additional material: )…
P
Printables
Victron SmartShunt DIN rail mount
DIN rail (35mm top hat rail) mounting bracket for Victron SmartShunt. After print, assemble and cut M6 threads in holes.
P
Printables
cover for victron shunt
This is a cover for the victron shunt. I didn't like the openness, so I designed the cover. As Material I used PETg. No special print instructions … Please note: this cover is flush with the contacts of the shunt, do NOT use washers UNDER…
P
Printables
Watt Meter Shunt Cover
Covers the terminals of the shunt . AiLi Voltmeter Ammeter Voltage Current Meter Voltmeter Ammeter 80V 350A
P
Printables
modified shunt v2 case base
Changed hole distances to fit my aliexpress shunt and made it print easier. Hole offsets are embossed into the part. Category: Electronics
P
Printables
08 Diesel shunter for the Hornby 0-4-0 (designed for custom 0-6-0 chassis)
This model was designed to go along with a custom 0-6-0 chassis that works with 0-4-0 shells. so this motor is compatible with non-cylinder Hornby 0-4-0 chassis. the shell was made to resemble an old Tri-ang 08 diesel shunter I got at a…
P
Printables
Victron Lynx - Battery Switch + Smart shunt enclosure
An enclosure to house a Victron 275A Battery Switch and Victron 500A Smart shunt, to be coupled with other modules of the lynx distributor, made from the original Victron Lynx Shunt VE.Can enclosure model. I made this model for my own…
P
Printables
Victron SmartShunt Mounting Bracket
I needed to mount a Victron SmartShunt inside my Baddeley MKIII Astromech droid, but I found it would be easier to make the connections if it were rotated on its side, and I didn't want to drill into either the body wall or the floor to…
P
Printables
victron shunt terminal cap
in addition to my cover of the shunt https://www.printables.com/model/255704-cover-for-victron-shunt I created a cover of the terminals of the shunt. print instructions variable/adaptive layer height is nice to make rounded edges look…
P
Printables
Victron Lynx compatible Smart Shunt and switch housing
This is a remix of the other top from RobrechtDR. It uses the same bottom which houses a Victron Smart Shunt and Battery cutoff switch. The main difference is that I've flattened the top to make it easier to print.
P
Printables
Victron Energy 500A shunt cover
This Victron Energy 500A shunt is the newer (IP65 version, released 2023). I think the older non-IP65 version has the same bolt hole spacing, so this cover should work on that one too. This is a simple cover to protect the 10mm hex bolt…
P
Printables
Nederlandse Spoorwegen 636 Diesel Shunting Locomotive - Gauge 1 / 1:32
I have modified the BR Class 08 published by Peter Davis at the GaugeOne3DCircle ( https://gaugeone3dcircle.groups.io/g/home/files/BR%2008%20Shunter ) to the Dutch version of this locomotive. Thanks again to Peter for publishing these…
P
Printables
Battery Monitor Housing for Junctek 600A Shunt Monitor
This housing is designed to contain: 1x - Junctek 600A Bluetooth Battery Shunt Monitor with RS-485 Display, Temperature Sensor, and Relay Control (KH160F-0-120V-0-600A) 2x - Anderson Powerpole 175A Connectors (Supply and Load Sides of…
P
Printables
100 Amp Shunt Holder - Parametric - OpenSCAD
I found other shunt holders but they didn't fit the shunt I had. They were out by about 5mm. This fits a shunt with 85mm between the main bolt holes. But its created with OpenSCAD so you can change it . Using OpenSCAD download OpenSCAD…
P
Printables
Caja display shunt Juntck
El display no viene para montar en superficie,entonces diseñe esta cajita que va perfecta.
P
Printables
Victron 500A Shunt Enclosure / Cover (for BMV-700/702/712 Battery Monitor)
This shunt enclosure/cover protects against accidental short circuit and physical damage . Designed specifically for the standard 500A/50mV Victron shunt (included with BMV-Series battery monitors with physical display ) for a snug fit…
P
Printables
Small shunting locomotive with working brakes
About A small toy shunting locomotive with opening doors and roof, and real working brakes. This locomotive fits popular brick figures. All elements are very easy to print even for begginers (do not require the use of supports). All parts…
P
Printables
DeichselGriff zum Rangieren/Shunting grip
Rangierhilfe für einen Eriba Puck, originale gibt es leider nicht für 45mm Rohrdurchmesser, deswegen dieses Design. Als Schrauben funktionieren M4 und M5 mit 45-50mm Länge Beim Bild, nicht wundern - ist noch mit Resten gedruckt. PETG ist…
P
Printables
VictronEnergy Smart Shunt Shield
I wanted a method to attach the SmartShunt directly to a 120Ah battery. The main issue I faced was the large 10MM bolts on the shunt. The battery terminal was 8mm, and the accessories I connected were also 8mm, rather than a bunch of very…
P
Printables
Victron energy Smart Shunt 500A + Victron Battery Switch 275A
I uploaded the entire project in both STL and 3MF format and it can be found in the project: Victron Energy LCD Box
P
Printables
Class 08 British rail shunter model rail model train
Class 08 British rail shunter model rail model train
P
Printables
Hager FZ44H Cable shunting cover bracket / Rangierkanal Profilhalter
I broke one, so I made one. Hope someone will find it useful. I Don't know if it is compatible to all Hager products. But for me as replacement it works nicely. Print Settings Printer Brand: Anycubic Printer: Kobra 2 Max Rafts: Yes…
P
Printables
PZEM-017 universal mount (/w DIN) and shunt mount
I need power 48v box for connect more batteries and also need messure current and voltage. With PZEM-017 i can do this but how i can install sensor device on power distribution box?! I just made holder for device and 300A shunt with…
P
Printables
Victron 500A Smart Shunt cover
This is a cover for a Victron 500A Smart Shunt. It has been designed with the cables coming out in a specific direction (as seen in the photos). However, if the cables on your system come out in another direction you are welcome to vary…
P
Printables
Victron 500A SmartShunt Enclosure / Cover (IP21 & IP65)
This Victron SmartShunt enclosure/cover protects against accidental short circuits and physical damage . Designed specifically for the 500A/50mV Victron SmartShunt (Bluetooth, without physical display ) for a snug fit and optimal…
P
Printables
Brake details NS 636 shunting locomotive
These parts can be printed with a standard 0.4 nozzle. Some wire is needed for the cabin brake handle en fixing the brake levers (Remstanghevel). The cover picture shows the position of the parts. Good luck with the assembly.
P
Printables
TR16 Battery monitor screen and 100A shunt
A quick CAD model of the TR16 screen and 100A shunt Category: Electronics