Counting matching models…
Protective cover for the Victron Energy BMV 500A shunt (e.g. as used in the BMV712). I have provided covers for cable side exit (as used in my own setup) as well as rear and front exit alternatives. Print Settings Rafts: Not needed…
This block is a back plate for mounting a Victron Smartshunt on an enclosure. The block is placed on the outer surface of the enclosure to provides both security and stability. Drill 2 holes 100mm apart and place the shunt inside. The…
Shunt holder block and Shunt model typical shunt that comes with the panel mount Amp and Voltage meters and locks in M8 bolt . Updates : Have also included the model of the 100A shunt . V3's Length on the v2 models was a bit short for…
This is a model of a Codman Certas brand (LP/VP) shunt adjuster tool, and it is designed for doll toys. The entire toy can be printed on a single colour printer. All parts are printed as originated in STL's. the Body Top needs to be…
Some protection for your SmartShunt from accidental shorting. Print in PETG or PC.
Protective cover for the Victron Energy BMV 500A shunt (e.g. as used in the BMV712). I have provided covers for cable side exit (as used in my own setup) as well as rear and front exit alternatives. Print Settings Rafts: Not needed…
This box is designed for analog measurement of the current flowing from your Kepco BOP power source. By incorporating a shunt resistor (1 Ohm or 0.1 Ohm are recommended options), you can measure the voltage across it to determine the…
Hi! This is my model of ČD class 700 locomotive, also know as piggy (prasátko in czech) for 3d print. Tested on Prusa mini+ Scale:1:63 En Info and HIstory: The ČD Class 700 (Before ČSD Class T 211.0) is a two-axle diesel–mechanical…
This mounting bracket mounts the diybms shunt PCB to a 1000A Victron shunt. I use it in conjunction with a Lynx PowerIn T-Class and a Lynx Distributer M8 (while a M10 would be better suited, as the Victron shunt is M10…) i attached also…
Simple shunt cover for the open-frame Victron 500A Smart-shunt in a straight-through cable configuration. Parametric FreeCAD file included for customization.
A simpel bracket to mount the Victron Smartshunt 300A to a wall. I don't know if the 500A version will fit.
This little shunter will happily pull around your Brio and Ikea trains. Parts List: 4x M2 cap head screws 6-12mm length 4x M2 washers 2x 10x4x3mm ring magnets 2x 10mm diameter metal push pins A touch of CA glue Printing Instructions:…
Ich habe in meinen EEL Battery Boxen V4 den unbrauchbaren Chcyzo MCB durch einen Schneider Electric Leitungsschutzschalter Typ C120H mit 125A (Bestellnummer A9N18404, ca. 70€) ersetzt. Der passt statt dem Chcyzo direkt rein. In meinem…
Use a strong filament for the back plate, as PC, PETG, etc For the blue face, you can use any filament. Use supports! A list of parts HERE The closest colour match I can find to the original Victron colour seems to be (I did not have that…
Victron Lynx is a nice & tidy system, but I feel that it is money-oriented Why? - Lynx PowerIn can be easily transformed into a Lynx Distributor (with no LEDs) - Lynx Distributor takes power from the Lynx Shunt. - Lynx Distributor has…
Box for iBMS and Smart Shunt connection. All components are in one box, easy to install on the wall using double-sided a
Simple spacer to go underneath these reasonable bus bars. Designed for two purposes - allow wiring to pass beneath the bus bar and to height match to the smart shut so that copper flat can be used for high amp interconnects. Pass through…
A forced air cooled shunt made out of 100W resistors. An optional USB-C trigger board with a 3A buck converter can be used for power supply. So you have all your "good" power supply outputs for your circuits. All typical AliExpress stuff.…
This block is a back plate for mounting a Victron Smartshunt on an enclosure. The block is placed on the outer surface of the enclosure to provides both security and stability. Drill 2 holes 100mm apart and place the shunt inside. The…
Shunt holder block and Shunt model typical shunt that comes with the panel mount Amp and Voltage meters and locks in M8 bolt . Updates : Have also included the model of the 100A shunt . V3's Length on the v2 models was a bit short for…
This is a model of a Codman Certas brand (LP/VP) shunt adjuster tool, and it is designed for doll toys. The entire toy can be printed on a single colour printer. All parts are printed as originated in STL's. the Body Top needs to be…
110% needs support and increased bed adhesion. As of May 11th, 2026, it is not printer tested. needs chassis and body glued together definitely. higher infill reccomended
Remixed John SC's and Jarhead's panels to better support what I wanted. I changed up the switch panel to include a power meter (I used this power meter in my build, others may work too.) and mount a shunt behind the Sovol touch screen, as…
Moved things around and added a pre-charge button and led to it. Had to get creative with the busbars to make it fit, not the prettiest busbars. button: https://s.click.aliexpress.com/e/_c40G5HgV light:…
I designed these mechanics to be human or lashunta when i started modeling for thingiverse one thing that really helped me was the community and one of those prolific artists is dutchmogul he provided free sculptris "dummies" which really…
I designed these with and with out antenna so they can be human or lashunta when i started modeling for thingiverse one thing that really helped me was the community and one of those prolific artists is dutchmogul he provided free…
I required an enclosure for a 50A shunt to prevent people touching it. To make it more interesting, I also added a DIN-rail mount because... DIN rails. You'll need some additional material: )…
DIN rail (35mm top hat rail) mounting bracket for Victron SmartShunt. After print, assemble and cut M6 threads in holes.
This is a cover for the victron shunt. I didn't like the openness, so I designed the cover. As Material I used PETg. No special print instructions … Please note: this cover is flush with the contacts of the shunt, do NOT use washers UNDER…
Covers the terminals of the shunt . AiLi Voltmeter Ammeter Voltage Current Meter Voltmeter Ammeter 80V 350A
Changed hole distances to fit my aliexpress shunt and made it print easier. Hole offsets are embossed into the part. Category: Electronics
This model was designed to go along with a custom 0-6-0 chassis that works with 0-4-0 shells. so this motor is compatible with non-cylinder Hornby 0-4-0 chassis. the shell was made to resemble an old Tri-ang 08 diesel shunter I got at a…
An enclosure to house a Victron 275A Battery Switch and Victron 500A Smart shunt, to be coupled with other modules of the lynx distributor, made from the original Victron Lynx Shunt VE.Can enclosure model. I made this model for my own…
I needed to mount a Victron SmartShunt inside my Baddeley MKIII Astromech droid, but I found it would be easier to make the connections if it were rotated on its side, and I didn't want to drill into either the body wall or the floor to…
in addition to my cover of the shunt https://www.printables.com/model/255704-cover-for-victron-shunt I created a cover of the terminals of the shunt. print instructions variable/adaptive layer height is nice to make rounded edges look…
This is a remix of the other top from RobrechtDR. It uses the same bottom which houses a Victron Smart Shunt and Battery cutoff switch. The main difference is that I've flattened the top to make it easier to print.
This Victron Energy 500A shunt is the newer (IP65 version, released 2023). I think the older non-IP65 version has the same bolt hole spacing, so this cover should work on that one too. This is a simple cover to protect the 10mm hex bolt…
I have modified the BR Class 08 published by Peter Davis at the GaugeOne3DCircle ( https://gaugeone3dcircle.groups.io/g/home/files/BR%2008%20Shunter ) to the Dutch version of this locomotive. Thanks again to Peter for publishing these…
This housing is designed to contain: 1x - Junctek 600A Bluetooth Battery Shunt Monitor with RS-485 Display, Temperature Sensor, and Relay Control (KH160F-0-120V-0-600A) 2x - Anderson Powerpole 175A Connectors (Supply and Load Sides of…
I found other shunt holders but they didn't fit the shunt I had. They were out by about 5mm. This fits a shunt with 85mm between the main bolt holes. But its created with OpenSCAD so you can change it . Using OpenSCAD download OpenSCAD…
El display no viene para montar en superficie,entonces diseñe esta cajita que va perfecta.
This shunt enclosure/cover protects against accidental short circuit and physical damage . Designed specifically for the standard 500A/50mV Victron shunt (included with BMV-Series battery monitors with physical display ) for a snug fit…
About A small toy shunting locomotive with opening doors and roof, and real working brakes. This locomotive fits popular brick figures. All elements are very easy to print even for begginers (do not require the use of supports). All parts…
Rangierhilfe für einen Eriba Puck, originale gibt es leider nicht für 45mm Rohrdurchmesser, deswegen dieses Design. Als Schrauben funktionieren M4 und M5 mit 45-50mm Länge Beim Bild, nicht wundern - ist noch mit Resten gedruckt. PETG ist…
I wanted a method to attach the SmartShunt directly to a 120Ah battery. The main issue I faced was the large 10MM bolts on the shunt. The battery terminal was 8mm, and the accessories I connected were also 8mm, rather than a bunch of very…
I uploaded the entire project in both STL and 3MF format and it can be found in the project: Victron Energy LCD Box
Class 08 British rail shunter model rail model train
I broke one, so I made one. Hope someone will find it useful. I Don't know if it is compatible to all Hager products. But for me as replacement it works nicely. Print Settings Printer Brand: Anycubic Printer: Kobra 2 Max Rafts: Yes…
I need power 48v box for connect more batteries and also need messure current and voltage. With PZEM-017 i can do this but how i can install sensor device on power distribution box?! I just made holder for device and 300A shunt with…
This is a cover for a Victron 500A Smart Shunt. It has been designed with the cables coming out in a specific direction (as seen in the photos). However, if the cables on your system come out in another direction you are welcome to vary…
This Victron SmartShunt enclosure/cover protects against accidental short circuits and physical damage . Designed specifically for the 500A/50mV Victron SmartShunt (Bluetooth, without physical display ) for a snug fit and optimal…
These parts can be printed with a standard 0.4 nozzle. Some wire is needed for the cabin brake handle en fixing the brake levers (Remstanghevel). The cover picture shows the position of the parts. Good luck with the assembly.
A quick CAD model of the TR16 screen and 100A shunt Category: Electronics
