Victron 500A Shunt Enclosure / Cover (for BMV-700/702/712 Battery Monitor)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Protects against accidental short circuit and physical damage.
- Rating
- 0 / 5
- Likes
- 29
- Makes
- 0
- Views
- 2,412
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Standard Digital File License
This shunt enclosure/cover protects against accidental short circuit and physical damage. Designed specifically for the standard 500A/50mV Victron shunt (included with BMV-Series battery monitors with physical display) for a snug fit and optimal protection. Accepts wire of any gauge (AWG) and coming out from any side of the shunt.
Compatible with
- Victron BMV-700 with 500A/50mV Shunt
- Victron BMV-702 with 500A/50mV Shunt
- Victron BMV-712 Smart (Bluetooth) with 500A/50mV Shunt
(affiliate links)
Installation
1. Remove the mounting screws and the wires/connectors from the shunt. Slide down the enclosure over the shunt:

2. Install the mounting screws and connect the wires to the shunt:

3. The cover uses friction-fit over the two M10 screws to stay in place:

4. To install the cover, simply slide it over the two M10 screws:

5. Connect the RJ12 telephone cable, positive battery connection and auxiliary connection (as required):

Filament
Shunts can get very hot and so I recommend PC for high temperature resistance. And as it turns out, Polymaker makes a nice PC with Victron-like blue color so it's a no-brainer:
https://amzn.to/4aSYKY2 (affiliate link)
Print Settings
- 0.2mm layer height
- 2 Wall loops
- 0.5mm Outer wall
- 0.55mm Inner wall
- Arachne
- 100% Sparse Infill
- With support:

