Victron 500A Shunt Enclosure / Cover (for BMV-700/702/712 Battery Monitor)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protects against accidental short circuit and physical damage.
- Ocena
- 0 / 5
- Polubienia
- 29
- Wydruki
- 0
- Wyświetlenia
- 2405
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Standard Digital File License
This shunt enclosure/cover protects against accidental short circuit and physical damage. Designed specifically for the standard 500A/50mV Victron shunt (included with BMV-Series battery monitors with physical display) for a snug fit and optimal protection. Accepts wire of any gauge (AWG) and coming out from any side of the shunt.
Compatible with
- Victron BMV-700 with 500A/50mV Shunt
- Victron BMV-702 with 500A/50mV Shunt
- Victron BMV-712 Smart (Bluetooth) with 500A/50mV Shunt
(affiliate links)
Installation
1. Remove the mounting screws and the wires/connectors from the shunt. Slide down the enclosure over the shunt:

2. Install the mounting screws and connect the wires to the shunt:

3. The cover uses friction-fit over the two M10 screws to stay in place:

4. To install the cover, simply slide it over the two M10 screws:

5. Connect the RJ12 telephone cable, positive battery connection and auxiliary connection (as required):

Filament
Shunts can get very hot and so I recommend PC for high temperature resistance. And as it turns out, Polymaker makes a nice PC with Victron-like blue color so it's a no-brainer:
https://amzn.to/4aSYKY2 (affiliate link)
Print Settings
- 0.2mm layer height
- 2 Wall loops
- 0.5mm Outer wall
- 0.55mm Inner wall
- Arachne
- 100% Sparse Infill
- With support:

