1 / 5
Victron Smart Shunt IP65 Case with lid — image 1
1 / 5

Victron Smart Shunt IP65 Case with lid

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The Victron Smart Shunt IP65 Case with Lid for RV mounting on back of battery box

Rating
0 / 5
Likes
2
Downloads
7
Makes
0
Views
61
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

The Victron Smart Shunt IP65 Case is designed to be attached to the side of the battery boxes on an RV. The box is not meant to be water resistant given the shunt is IP65 rated. It is designed to project from elements to some extent. The ports on the sides are for wires to be fed into the box. The shunt can be screwed to the bottom but there are blocks in the bottom that create a snug fit. With the wires attached and weight of the shunt I see little need to fasten the shunt into the box at this point. There are drain slots on each end to ensure water does not stand in the bottom of the box.
There is a screw hole in the lid to secure it if needed.

Should be printed in PETG or other heat resistant materials.

Tags